Show Abstract ▼

Abstract: Zeolitic imidazolate frameworks (ZIFs), a subclass of metal–organic frameworks (MOFs), combine high porosity and chemical tunability with a resistance to harsh conditions. Understanding their response to extreme pressure and heat is critical for application development due to the conditions under which they may be required to work or for predicting their response to any processing before use. In this study, we characterize long- and short-range order in ZIF-8 and ZIF-62 under compression using Bragg X-ray diffraction and pair distribution function (PDF) analysis for a large pressure range (up to ∼5 GPa) previously attempted in very few works. X-ray absorption fine structure analysis was carried out under high-pressure-temperature conditions to probe the medium-range order, a novelty in MOFs. ZIF-8 demonstrated a crystalline–crystalline phase transition above 0.36 GPa but no full amorphization. In ZIF-62, pore intrusion of the silicone oil pressure-transmitting medium (PTM) was observed through negative compressibility and by retention of its open-pore configuration. Full amorphization was achieved, with heating lowering the amorphization threshold. Finally, a unique distortion in both MOFs was suggested by the spectroscopic data. These results provide insight into the thermomechanical stability of crystalline ZIFs and the mechanism underlying their amorphization.

Open Access

Show Abstract ▼

Abstract: Metal–organic framework (MOF) composites are proposed as solutions to the mechanical instability of pure MOF materials. Here, we present a new compositional series of recently discovered MOF–crystalline inorganic glass composites. In this case, formed by the combination of a photocatalytic titanium MOF (MIL-125-NH2) and a phosphate-based glass (20%Na2O–10%Na2SO4–70%P2O5). This new family of composites has been synthesized and characterized using powder X-ray diffraction, thermal gravimetric analysis, differential scanning calorimetry, scanning electron microscopy, and X-ray total scattering. Through analysis of the pair distribution function extracted from X-ray total scattering data, the atom–atom interactions at the MOF–glass interface are described. Nitrogen and carbon dioxide isotherms demonstrate good surface area values despite the pelletization and mixing of the MOF with a dense inorganic glass. The catalytic activity of these materials was investigated in the photooxidation of amines to imines, showing the retention of the photocatalytic effectiveness of the parent pristine MOF.

Show Abstract ▼

Abstract: Metal-organic frameworks (MOFs) are a versatile class of hybrid inorganic-organic materials known for their adjustable chemical and physical properties, as well as their exceptional porosity. These characteristics render MOFs particularly valuable for applications requiring extensive surface areas, such as gas storage and catalysis. Despite being advantageous in many applications, the high porosity and specific bonding characteristics of crystalline MOFs can, however, make them susceptible to pore collapse and amorphisation under pressure. This limits the practical effectiveness of MOFs in their most commonly synthesised form of crystalline powders, as large-scale production and shaping of powders for industrial use often involves pressure and heating. This thesis examines how a range of MOFs behave under various high pressure and high pressure-temperature conditions to examine both their amorphisation mechanisms and amorphous phases formed. The MOFs were selected to fall within two groups: zirconium-based (UiO-66, MOF-808 and NU-1000) and zinc-based (ZIF-8, ZIF-4 and ZIF-62). The methods chosen for investigations were hydrostatic compression, non-hydrostatic compression, and ball-milling, as they are all used for industrial processing of powders: The former two are methods for shaping, and the latter for mixing. Hydrostatic compression of these MOFs is investigated in depth through in situ high pressure-temperature crystallographic and spectroscopic measurements, allowing real-time analysis on the MOFs’ collapse mechanisms. Both groups display partially reversible amorphisation under hydrostatic compression to certain pressures, indicating a displacive amorphisation transition into an amorphous phase topologically similar to the crystalline. Penetration of the pressure-transmitting media into the framework’s pores was also indicated in each MOF, with clear negative volume compressibility shown in the zinc-based MOFs. Ex situ investigations into non-hydrostatic compression then introduce the effect of shear stress so its effect on the MOFs can be highlighted, where the two groups demonstrate quite different behaviour attributed to differences in the connectivity of their inorganic components. Ball-milling is finally examined as a non-compression form of amorphisation with a high shear component. In both shear-based pressure states, decoordination of the organic components from the inorganic is seen as a driving factor of amorphisation. Understanding the collapse mechanisms and resultant amorphous phases from various amorphisation methods in these MOFs gives insight into trends in mechanical properties and stability within this class of materials, and is essential for the future industrialisation of MOFs.

Open Access

Show Abstract ▼

Abstract: Metal-organic framework (MOF) composite materials containing ionic liquids (ILs) have been proposed for a range of potential applications, including gas separation, ion conduction, and hybrid glass formation. Here, an order transition in an IL@MOF composite is discovered using CuBTC (copper benzene-1,3,5-tricarboxylate) and [EMIM][TFSI] (1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide). This transition – absent for the bare MOF or IL – provides an extended super-cooling range and latent heat at a capacity similar to that of soft paraffins, in the temperature range of ≈220 °C. Structural analysis and in situ monitoring indicate an electrostatic interaction between the IL molecules and the Cu paddle-wheels, leading to a decrease in pore symmetry at low temperature. These interactions are reversibly released above the transition temperature, which reflects in a volume expansion of the MOF-IL composite.

Open Access

Show Abstract ▼

Abstract: Hybrid organic–inorganic perovskites (HOIPs) occupy a prominent position in the field of materials chemistry due to their attractive optoelectronic properties. While extensive work has been done on the crystalline materials over the past decades, the newly reported glasses formed from HOIPs open up a new avenue for perovskite research with their unique structures and functionalities. Melt-quenching is the predominant route to glass formation; however, the absence of a stable liquid state prior to thermal decomposition precludes this method for most HOIPs. In this work, we describe the first mechanochemically-induced crystal-glass transformation of HOIPs as a rapid, green and efficient approach for producing glasses. The amorphous phase was formed from the crystalline phase within 10 minutes of ball-milling, and exhibited glass transition behaviour as evidenced by thermal analysis techniques. Time-resolved in situ ball-milling with synchrotron powder diffraction was employed to study the microstructural evolution of amorphisation, which showed that the crystallite size reaches a comminution limit before the amorphisation process is complete, indicating that energy may be further accumulated as crystal defects. Total scattering experiments revealed the limited short-range order of amorphous HOIPs, and their optical properties were studied by ultraviolet-visible (UV-vis) spectroscopy and photoluminescence (PL) spectroscopy.