B22-Multimode InfraRed imaging And Microspectroscopy
|
Dukula
De Alwis Jayasinghe
,
Yinlin
Chen
,
Jiangnan
Li
,
Justyna M.
Rogacka
,
Meredydd
Kippax-Jones
,
Wanpeng
Lu
,
Sergey
Sapchenko
,
Jinyue
Yang
,
Sarayute
Chansai
,
Tianze
Zhou
,
Lixia
Guo
,
Yujie
Ma
,
Longzhang
Dong
,
Daniil
Polyukhov
,
Lutong
Shan
,
Yu
Han
,
Danielle
Crawshaw
,
Xiangdi
Zeng
,
Zhaodong
Zhu
,
Lewis
Hughes
,
Mark D.
Frogley
,
Pascal
Manuel
,
Svemir
Rudic
,
Yongqiang
Chen
,
Christopher
Hardacre
,
Martin
Schroeder
,
Sihai
Yang
Open Access
Abstract: Ammonia (NH3) production in 2023 reached 150 million tons and is associated with potential concomitant production of up to 500 million tons of CO2 each year. Efforts to produce green NH3 are compromised since it is difficult to separate using conventional condensation chillers, but in situ separation with minimal cooling is challenging. While metal–organic framework materials offer some potential, they are often unstable and decompose in the presence of caustic and corrosive NH3. Here, we address these challenges by developing a pore-expansion strategy utilizing the flexible phosphonate framework, STA-12(Ni), which shows exceptional stability and capture of NH3 at ppm levels at elevated temperatures (100–220 °C) even under humid conditions. A remarkable NH3 uptake of 4.76 mmol g–1 at 100 μbar (equivalent to 100 ppm) is observed, and in situ neutron powder diffraction, inelastic neutron scattering, and infrared microspectroscopy, coupled with modeling, reveal a pore expansion from triclinic to a rhombohedral structure on cooperative binding of NH3 to unsaturated Ni(II) sites and phosphonate groups. STA-12(Ni) can be readily engineered into pellets or monoliths without losing adsorption capacity, underscoring its practical potential.
|
Nov 2024
|
|
I20-EDE-Energy Dispersive EXAFS (EDE)
|
Diamond Proposal Number(s):
[28203]
Abstract: Understanding nature of intermediates/active species in reactions is a major challenge in chemistry. This is because spectator species typically dominate the experimentally derived data and consequently active phase contributions are masked. Transient methods offer a means to bypass this difficulty. In particular, modulation excitation with phase-sensitive detection (ME-PSD) provides a mechanism to distinguish between spectator and reacting species. Herein, modulation excitation (ME) time-resolved (energy dispersive) X-ray absorption spectroscopy, assisted by phase sensitive detection (PSD) analysis, has been applied to the study of a liquid phase process; in this case the classic ferrocyanide/ferricyanide redox couple. Periodic switches of the electrical potential (anodic/cathodic) enabled the use of the ME approach. Structural changes at fractions as low as 2% of the total number of electroactive species were detected within the X-ray beam probe volume containing ~30 pmol of Fe(II)/Fe(III).
|
Aug 2024
|
|
B18-Core EXAFS
|
Yujie
Ma
,
Xue
Han
,
Shaojun
Xu
,
Zhe
Li
,
Wanpeng
Lu
,
Bing
An
,
Daniel
Lee
,
Sarayute
Chansai
,
Alena M.
Sheveleva
,
Zi
Wang
,
Yinlin
Chen
,
Jiangnan
Li
,
Weiyao
Li
,
Rongsheng
Cai
,
Ivan
Da Silva
,
Yongqiang
Cheng
,
Luke L.
Daemen
,
Floriana
Tuna
,
Eric J. L.
Mcinnes
,
Lewis
Hughes
,
Pascal
Manuel
,
Anibal J.
Ramirez-Cuesta
,
Sarah J.
Haigh
,
Christopher
Hardacre
,
Martin
Schroeder
,
Sihai
Yang
Diamond Proposal Number(s):
[19850]
Open Access
Abstract: Conversion of methane (CH4) to ethylene (C2H4) and/or acetylene (C2H2) enables routes to a wide range of products directly from natural gas. However, high reaction temperatures and pressures are often required to activate and convert CH4 controllably, and separating C2+ products from unreacted CH4 can be challenging. Here, we report the direct conversion of CH4 to C2H4 and C2H2 driven by non-thermal plasma under ambient (25 °C and 1 atm) and flow conditions over a metal–organic framework material, MFM-300(Fe). The selectivity for the formation of C2H4 and C2H2 reaches 96% with a high time yield of 334 μmol gcat–1 h–1. At a conversion of 10%, the selectivity to C2+ hydrocarbons and time yield exceed 98% and 2056 μmol gcat–1 h–1, respectively, representing a new benchmark for conversion of CH4. In situ neutron powder diffraction, inelastic neutron scattering and solid-state nuclear magnetic resonance, electron paramagnetic resonance (EPR), and diffuse reflectance infrared Fourier transform spectroscopies, coupled with modeling studies, reveal the crucial role of Fe–O(H)–Fe sites in activating CH4 and stabilizing reaction intermediates via the formation of an Fe–O(CH3)–Fe adduct. In addition, a cascade fixed-bed system has been developed to achieve online separation of C2H4 and C2H2 from unreacted CH4 for direct use. Integrating the processes of CH4 activation, conversion, and product separation within one system opens a new avenue for natural gas utility, bridging the gap between fundamental studies and practical applications in this area.
|
Sep 2023
|
|
B18-Core EXAFS
|
Run
Zou
,
Sarayute
Chansai
,
Shaojun
Xu
,
Bing
An
,
Shima
Zainal
,
Yangtao
Zhou
,
Ruojia
Xin
,
Pan
Gao
,
Guangjin
Hou
,
Carmine
D’agostino
,
Stuart M.
Holmes
,
Christopher
Hardacre
,
Yilai
Jiao
,
Xiaolei
Fan
Diamond Proposal Number(s):
[29271]
Open Access
Abstract: Stabilisation of metal species using hydroxyl-rich dealuminated zeolites is a promising method for catalysis. However, insights into the interactions between the hydroxyl groups in zeolite and noble metals and their effects on catalysis are not yet fully understood. Herein, comparative studies were conducted using Pt catalysts supported on hydroxyl-rich dealuminated Beta (deAl-Beta) and the pristine proton-form Beta (H-Beta) for catalytic oxidation of toluene. The findings suggest that during impregnation the Pt precursor (i.e., Pt(NH3)4(NO3)2) interacted with different sites on deAl-Beta and H-Beta, leading to the formation of supported Pt nanoparticles with different physicochemical properties. The resulting Pt/deAl-Beta exhibited improved activity and anti-coking ability than Pt/H-Beta in catalytic toluene oxidation. According to toluene-TPD, 1H NMR relaxation and in situ DRIFTS characterisation, the enhanced performance of Pt/deAl-Beta could be ascribed to (i) the active Pt-O sites stabilised by hydroxyl groups, which interact with toluene easily for conversion, and (ii) the acid-free feature of the deAl-Beta support, which avoids the formation of coke precursors (such as benzoate species) on the catalyst surface. Findings of the work can serve as the design guidelines for making effective supported metal catalysts using zeolitic carriers.
|
Sep 2023
|
|
E01-JEM ARM 200CF
|
Shanshan
Xu
,
Thomas J. A.
Slater
,
Hong
Huang
,
Yangtao
Zhou
,
Yilai
Jiao
,
Christopher M. A.
Parlett
,
Shaoliang
Guan
,
Sarayute
Chansai
,
Shaojun
Xu
,
Xinrui
Wang
,
Christopher
Hardacre
,
Xiaolei
Fan
Diamond Proposal Number(s):
[29468]
Open Access
Abstract: The stability of catalysts in dry reforming of methane (DRM) is a known issue. In this paper an encapsulation strategy has been employed to improve the stability compared with conventional impregnation methods. Herein, nickel nanoparticles encapsulated in silicalite-1 were prepared using a range of methods including post treatment, direct hydrothermal and seed-directed methods to investigate the effect of synthesis protocol on the properties of catalysts, such as degree of encapsulation and Ni dispersion, and anti-coking/-sintering performance in DRM. The Ni@SiO2-S1 catalysts obtained by the seed-directed synthesis presented the full encapsulation of Ni NPs by the zeolite framework with small particle sizes (∼2.9 nm) and strong metal-support interaction, which could sterically hinder the migration/aggregation of Ni NPs and carbon deposition. Therefore, Ni@SiO2-S1 showed stable CO2/CH4 conversions of 80% and 73%, respectively, with negligible metal sintering and coking deposition (∼0.5 wt.%) over 28 h, which outperformed the other catalysts prepared. In contrast, the catalysts developed by the post-treatment and ethylenediamine-protected hydrothermal methods showed the co-existence of Ni phase on the internal and external surfaces, i.e. incomplete encapsulation, with large Ni particles, contributing to Ni sintering and coking. The correlation of the synthesis-structure-performance in this study sheds light on the design of coking-/sintering-resistant encapsulated catalysts for DRM.
|
Jun 2022
|
|
B07-C-Versatile Soft X-ray beamline: Ambient Pressure XPS and NEXAFS
|
Jordan
Cole
,
Zoe
Henderson
,
Andrew G.
Thomas
,
Claudia L.
Compeán-González
,
Adam
Greer
,
Christopher
Hardacre
,
Federica
Venturini
,
Wilson
Quevedo Garzon
,
Pilar
Ferrer
,
David C.
Grinter
,
Georg
Held
,
Karen L.
Syres
Diamond Proposal Number(s):
[20532]
Abstract: In situ photoemission and near-edge X-ray absorption fine structure (NEXAFS) techniques have been used to study the interaction of CO2 with an ionic liquid thin film. A thin film of the superbasic ionic liquid (SBIL) trihexyltetradecylphosphonium benzimidazolide ([P66614][benzim]) was prepared on a rutile TiO2 (110) surface and exposed to CO2 at near-ambient pressures. NEXAFS measurements combined with density functional theory calculations indicate a realignment of [benzim]− anions from 27° from the surface normal to 54° upon exposure to CO2. Angle-resolved X-ray photoelectron spectroscopy (AR-XPS) shows evidence of irreversible CO2 absorption in thin films of [P66614][benzim] and a greater concentration of CO2-reacted anions in the deeper layers. These results give a new perspective on CO2 uptake in ionic liquids and fundamental interactions at the liquid–gas interface. Understanding this interfacial behavior is important for developing ILs for gas capture applications and may influence the performance of other IL-based technologies.
|
Oct 2021
|
|
I20-EDE-Energy Dispersive EXAFS (EDE)
|
Abstract: The use of X-ray absorption spectroscopy (XAS) to follow liquid phase catalysed reactions is widely used. However, in catalysis, small quantities of active species are usually present, complicating the differentiation of spectator and active species. In these cases, the use of Modulation Excitation (ME) techniques can be used to achieve a better signal-to-noise ratio by cycle averaging. ME coupled with phase-sensitive detection can significantly improve the sensitivity of the spectroscopic technique by filtering out contributions of spectator species that are unaltered by the external stimulation. This has been used in combined XAS/DRIFTS studies of gas phase reactions, successfully identifying surface intermediates present in small concentration. [1]
In this study, ME assisted by phase-sensitive detection analysis has been applied to the study of liquid-phase reactions using XAS. This methodology has been successfully applied to the study of the electrochemical oxidation of Na4FeII(CN)6. The experiment was undertaken in a newly three-electrode designed electrochemical cell at the I20-EDE beamline at Diamond Light Source. 30, 50, and 75 mM aqueous solutions of the iron complex in 1 M NaF/NaCl electrolytes were investigated. Cyclic voltammograms were measured during potential cycling with potential limits ± 1.5 V, at 200 and 300 mV/s scan rates, for 100 cycles. This perturbed the system reversibly allowing the cycle averaging of the XAS data.
This study shows that ME assisted by phase-sensitive detection analysis can be successfully applied to XAS for the study of liquid-phase reactions. Signal-to-noise ratios were improved significantly through cycle averaging, and additional information were extracted from the phase-resolved FT-EXAFS spectra demonstrating the enhanced sensitivity.
|
Jul 2021
|
|
B18-Core EXAFS
|
Diamond Proposal Number(s):
[10306, 19850]
Open Access
Abstract: Understanding the surface structure of bimetallic nanoparticles is crucial for heterogeneous catalysis. Although surface contraction has been established in monometallic systems, less is known for bimetallic systems, especially of nanoparticles. In this work, the bond length contraction on the surface of bimetallic nanoparticles is revealed by XAS in H2 at room temperature on dealloyed Pt–Sn nanoparticles, where most Sn atoms were oxidized and segregated to the surface when measured in air. The average Sn–Pt bond length is found to be ∼0.09 Å shorter than observed in the bulk. To ascertain the effect of the Sn location on the decrease of the average bond length, Pt–Sn samples with lower surface-to-bulk Sn ratios than the dealloyed Pt–Sn were studied. The structural information specifically from the surface was extracted from the averaged XAS results using an improved fitting model combining the data measured in H2 and in air. Two samples prepared so as to ensure the absence of Sn in the bulk were also studied in the same fashion. The bond length of surface Sn–Pt and the corresponding coordination number obtained in this study show a nearly linear correlation, the origin of which is discussed and attributed to the poor overlap between the Sn 5p orbitals and the available orbitals of the Pt surface atoms.
|
May 2021
|
|
B18-Core EXAFS
|
Diamond Proposal Number(s):
[15151]
Abstract: Hydrothermal degreening and ageing procedures were applied to a tri-metal (Pt-Pd-Rh) fully formulated lean NOX Trap catalyst to evaluate the effects of thermal stress on the performances and structural properties. X-ray absorption fine structure (XAFS) analysis revealed that the average size of the platinum particles was the same after degreening and ageing treatments. The formation of a new phase of alloyed Pt-Pd was observed to increase with the thermal load. The size of the ceria particles also increased after the ageing treatment. NOX storage capacity experiments revealed a substantial decrease of the concentration of active NOX storage sites which correlated with both ageing and degreening protocols. The performances of the treated catalyst were evaluated through spatially resolved (SpaciMS) lean-rich cycles. During the lean phase, the impact of the decrease in storage sites was significant on the aged sample, where an enlargement of the area required to achieve full storage was observed. On the other hand, the regeneration functionalities did not appear to be particularly affected by ageing. Rather, the aged sample showed a decrease of oxygen storage capacity (OSC), which promoted a lower reductant consumption and therefore a quicker and more efficient reduction process. On the other hand, the different distributions of adsorbed species by the end of the lean phase produced greater spread presence of NH3 and NOX slip along the channels of the aged sample during the reduction.
|
Apr 2021
|
|
B18-Core EXAFS
B22-Multimode InfraRed imaging And Microspectroscopy
I11-High Resolution Powder Diffraction
|
Shaojun
Xu
,
Xue
Han
,
Yujie
Ma
,
Thien D.
Duong
,
Longfei
Lin
,
Emma K.
Gibson
,
Alena
Sheveleva
,
Sarayute
Chansai
,
Alex
Walton
,
Duc-The
Ngo
,
Mark D.
Frogley
,
Chiu C.
Tang
,
Floriana
Tuna
,
Eric J. L.
Mcinnes
,
C. Richard A.
Catlow
,
Christopher
Hardacre
,
Sihai
Yang
,
Martin
Schroeder
Open Access
Abstract: Efficient catalytic conversion of NO2 to non-harmful species remains an important target for research. State-of-the-art deNOx processes are based upon ammonia (NH3)-assisted selective catalytic reduction (NH3-SCR) over Cu-exchanged zeolites at elevated temperatures. Here, we describe a highly efficient non-thermal plasma (NTP) deNOx process catalyzed by a Cu-embedded metal-organic framework, Cu/MFM-300(Al), at room temperature. Under NTP activation at 25°C, Cu/MFM-300(Al) enables direct decomposition of NO2 into N2, NO, N2O, and O2 without the use of NH3 or other reducing agents. NO2 conversion of 96% with a N2 selectivity of 82% at a turnover frequency of 2.9 h−1 is achieved, comparable to leading NH3-SCR catalysts that use NH3 operating at 250°C–550°C. The mechanism for the rate-determining step (NO→N2) is elucidated by in operando diffuse reflectance infrared Fourier transform spectroscopy, and electron paramagnetic resonance spectroscopy confirms the formation of Cu2+⋯NO nitrosylic adducts on Cu/MFM-300(Al), which facilitates NO dissociation and results in the notable N2 selectivity.
|
Feb 2021
|
|
