E01-JEM ARM 200CF
|
Diamond Proposal Number(s):
[32135]
Open Access
Abstract: Understanding Li+ ion diffusion pathways in Li-rich layered transition metal (TM) oxides is crucial for understanding the sluggish kinetics in anionic O2– redox. Although Li diffusion within the alkali layers undergoes a low-barrier octahedral–tetrahedral–octahedral pathway, it is less clear how Li diffuses in and out of the TM layers, particularly given the complex structural rearrangements that take place during the oxidation of O2–. Here, we develop simultaneous electron ptychography and annular dark field imaging methods to unlock the Li migration pathways in Li1.2Ni0.13Mn0.54Co0.13O2 associated with structural changes in the charge–discharge cycle. At the end of TM oxidation and before the high-voltage O oxidation plateau, we show that the Li migrating out of the TM layers occupies the alkali-layer tetrahedral sites on opposite sides of the TM layers, forming Li–Li dumbbell configurations, consistent with the density functional theory calculations. Also occurring are the TM migration and phase transition from O3 to O1 stacking, leading to unstable tetrahedral Li and the absence of Li contrast in imaging. Upon further Li deintercalation to 4.8 V, most of the tetrahedral Li are removed. After discharging to 2 V, we did not identify the reformation of tetrahedral Li but observed permanently migrated TMs at the alkali-layer sites, disfavoring the Li occupying the tetrahedral sites for diffusion. Our findings suggest a landscape of Li diffusion pathways in Li-rich layered oxides and strategies for minimizing the disruption of Li diffusion.
|
Aug 2024
|
|
I21-Resonant Inelastic X-ray Scattering (RIXS)
|
Diamond Proposal Number(s):
[25785]
Open Access
Abstract: Oxygen redox cathodes, such as Li1.2Ni0.13Co0.13Mn0.54O2, deliver higher energy densities than those based on transition metal redox alone. However, they commonly exhibit voltage fade, a gradually diminishing discharge voltage on extended cycling. Recent research has shown that, on the first charge, oxidation of O2− ions forms O2 molecules trapped in nano-sized voids within the structure, which can be fully reduced to O2− on the subsequent discharge. Here we show that the loss of O-redox capacity on cycling and therefore voltage fade arises from a combination of a reduction in the reversibility of the O2−/O2 redox process and O2 loss. The closed voids that trap O2 grow on cycling, rendering more of the trapped O2 electrochemically inactive. The size and density of voids leads to cracking of the particles and open voids at the surfaces, releasing O2. Our findings implicate the thermodynamic driving force to form O2 as the root cause of transition metal migration, void formation and consequently voltage fade in Li-rich cathodes.
|
Mar 2024
|
|
E02-JEM ARM 300CF
|
Diamond Proposal Number(s):
[22549]
Abstract: Monolayer PtSe2 holds great potential in extending 2D devices functionality, but their atomic-level-defect study is still limited. Here, we investigate the atomic structures of lattice imperfections from point to stretched 1D defects in 1T-PtSe2 monolayers, using annular dark-field scanning transmission electron microscopy (ADF-STEM). We show Se vacancies (VSe) have preferential sites with high beam-induced mobility. Diverse divacancies form with paired VSe. We found stretched linear defects triggered by dynamics of VSe that altered strain fields, distinct from the line vacancies in 2H-phase 2D materials. The paired VSe stability and formation possibility of vacancy lines are evaluated by density functional theory. Lower sputtering energy in PtSe2 than that in MoS2 can cause larger possibility of atomic loss compared to diffusion required for creating VSe lines. This provides atomic insights into the defects in 1T-PtSe2 and shows how a deviated 1D structure is embedded in a 2D system without losing atom lines.
|
Apr 2022
|
|
E02-JEM ARM 300CF
|
Md Hasibul
Alam
,
Sayema
Chowdhury
,
Anupam
Roy
,
Xiaohan
Wu
,
Ruijing
Ge
,
Michael A.
Rodder
,
Jun
Chen
,
Yang
Lu
,
Chen
Stern
,
Lothar
Houben
,
Robert
Chrostowski
,
Scott R.
Burlison
,
Sung Jin
Yang
,
Martha I.
Serna
,
Ananth
Dodabalapur
,
Filippo
Mangolini
,
Doron
Naveh
,
Jack C.
Lee
,
Sanjay K.
Banerjee
,
Jamie H.
Warner
,
Deji
Akinwande
Abstract: Molybdenum trioxide (MoO3), an important transition metal oxide (TMO), has been extensively investigated over the past few decades due to its potential in existing and emerging technologies, including catalysis, energy and data storage, electrochromic devices, and sensors. Recently, the growing interest in two-dimensional (2D) materials, often rich in interesting properties and functionalities compared to their bulk counterparts, has led to the investigation of 2D MoO3. However, the realization of large-area true 2D (single to few atom layers thick) MoO3 is yet to be achieved. Here, we demonstrate a facile route to obtain wafer-scale monolayer amorphous MoO3 using 2D MoS2 as a starting material, followed by UV–ozone oxidation at a substrate temperature as low as 120 °C. This simple yet effective process yields smooth, continuous, uniform, and stable monolayer oxide with wafer-scale homogeneity, as confirmed by several characterization techniques, including atomic force microscopy, numerous spectroscopy methods, and scanning transmission electron microscopy. Furthermore, using the subnanometer MoO3 as the active layer sandwiched between two metal electrodes, we demonstrate the thinnest oxide-based nonvolatile resistive switching memory with a low voltage operation and a high ON/OFF ratio. These results (potentially extendable to other TMOs) will enable further exploration of subnanometer stoichiometric MoO3, extending the frontiers of ultrathin flexible oxide materials and devices.
|
Feb 2022
|
|
B18-Core EXAFS
|
Peng
Tang
,
Hyeon Jeong
Lee
,
Kevin
Hurlbutt
,
Po-Yuan
Huang
,
Sudarshan
Narayanan
,
Chenbo
Wang
,
Diego
Gianolio
,
Rosa
Arrigo
,
Jun
Chen
,
Jamie H.
Warner
,
Mauro
Pasta
Diamond Proposal Number(s):
[26066]
Open Access
Abstract: Platinum single-site catalysts (SSCs) are a promising technology for the production of hydrogen from clean energy sources. They have high activity and maximal platinum-atom utilization. However, the bonding environment of platinum during operation is poorly understood. In this work, we present a mechanistic study of platinum SSCs using operando, synchrotron-X-ray absorption spectroscopy. We synthesize an atomically dispersed platinum complex with aniline and chloride ligands onto graphene and characterize it with ex-situ electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, X-ray absorption near-edge structure spectroscopy (XANES), and extended X-ray absorption fine structure spectroscopy (EXAFS). Then, by operando EXAFS and XANES, we show that as a negatively biased potential is applied, the Pt–N bonds break first followed by the Pt–Cl bonds. The platinum is reduced from platinum(II) to metallic platinum(0) by the onset of the hydrogen-evolution reaction at 0 V. Furthermore, we observe an increase in Pt–Pt bonding, indicating the formation of platinum agglomerates. Together, these results indicate that while aniline is used to prepare platinum SSCs, the single-site complexes are decomposed and platinum agglomerates at operating potentials. This work is an important contribution to the understanding of the evolution of bonding environment in SSCs and provides some molecular insights into how platinum agglomeration causes the deactivation of SSCs over time.
|
Feb 2022
|
|
E02-JEM ARM 300CF
|
Diamond Proposal Number(s):
[24610]
Abstract: Each 2D material has a distinct structure for its grain boundary and dislocation cores, which is dictated by both the crystal lattice geometry and the elements that participate in bonding. For the class of noble metal dichalcogenides, this has yet to be thoroughly investigated at the atomic scale. Here, we examine the atomic structure of the dislocations and grain boundaries (GBs) in two-dimensional PtSe2, using atomic-resolution annular dark field scanning transmission electron microscopy, combined with density functional theory and empirical force field calculations. The PtSe2 we study adopts the 1T phase in large-area polycrystalline films with numerous planar tilt GB distinct dislocations, including 5|7+Se and 4|4|8+Se polygons, in tilt-angle monolayer GBs, with features sharply distinguished from those in 2H-phase TMDs. On the basis of dislocation cores, the GB structures are investigated in terms of pathways of dislocation chain arrangement, dislocation core distributions in different misorientation angles, and 2D strain fields induced. Based on the Frank–Bilby equation, the deduced Burgers vector magnitude is close to the lattice constant of 1T-PtSe2, building the quantitative relationship of dislocation spacings and small GB angles. The 30° GBs are most frequently formed as a stitched interface between the armchair and zigzag lattices, constructed by a string of 5|7+Se dislocations asymmetrically with a small deviation angle. Another special angle GB, mirror twin 60° GB, is also mapped linearly by metal-condensed asymmetric or Se-rich symmetric dislocations. This report gives atomic-level insights into the GBs and dislocations in 1T-phase noble metal TMD PtSe2, which is a promising material to underpin extending properties of 2D materials by local structure engineering.
|
Oct 2021
|
|
|
|
Yili
Cao
,
Kun
Lin
,
Sergii
Khmelevskyi
,
Maxim
Avdeev
,
Keith M.
Taddei
,
Qiang
Zhang
,
Qingzhen
Huang
,
Qiang
Li
,
Kenichi
Kato
,
Chiu Chung
Tang
,
Alexandra
Gibbs
,
Chin-Wei
Wang
,
Jinxia
Deng
,
Jun
Chen
,
Hongjie
Zhang
,
Xianran
Xing
Abstract: Super Invar (SIV), i.e., zero thermal expansion of metallic materials underpinned by magnetic ordering, is of great practical merit for a wide range of high precision engineering. However, the relatively narrow temperature window of SIV in most materials restricts its potential applications in many critical fields. Here, we demonstrate the controlled design of thermal expansion in a family of
R
2
(
Fe
,
Co
)
17
materials (
R
=
rare
Earth). We find that adjusting the Fe-Co content tunes the thermal expansion behavior and its optimization leads to a record-wide SIV with good cyclic stability from 3–461 K, almost twice the range of currently known SIV. In situ neutron diffraction, Mössbauer spectra and first-principles calculations reveal the
3
d
bonding state transition of the Fe-sublattice favors extra lattice stress upon magnetic ordering. On the other hand, Co content induces a dramatic enhancement of the internal molecular field, which can be manipulated to achieve “ultrawide” SIV over broad temperature, composition and magnetic field windows. These findings pave the way for exploiting thermal-expansion-control engineering and related functional materials.
|
Jul 2021
|
|
|
|
Kuo-Lun
Tai
,
Jun
Chen
,
Yi
Wen
,
Hyoju
Park
,
Qianyang
Zhang
,
Yang
Lu
,
Ren-Jie
Chang
,
Peng
Tang
,
Christopher
Allen
,
Wen-Wei
Wu
,
Jamie H.
Warner
Abstract: Two-dimensional (2D) materials and van der Waals heterostructures with atomic-scale thickness provide enormous potential for advanced science and technology. However, insufficient knowledge of compatible synthesis impedes wafer-scale production. PdSe2 and Pd2Se3 are two of the noble transition-metal chalcogenides with excellent physical properties that have recently emerged as promising materials for electronics, optoelectronics, catalyst, and sensors. This research presents a feasible approach to synthesize PdSe2 and Pd2Se3 with inherently asymmetric structure on honeycomb lattice 2D monolayer substrates of graphene and MoS2. We directly deposit a molecular transition-metal precursor complex on the surface of the 2D substrates, followed by low-temperature selenization by chemical vapor flow. Parameter control leads to tuning of the material from monolayer nanocrystals with Pd2Se3 phase, to continuous few-layer PdSe2 films. Annular dark-field scanning transmission electron microscopy (ADF-STEM) reveals the structure, phase variations, and heteroepitaxy at the atomic level. PdSe2 with unconventional interlayer stacking shifts appeared as the kinetic product, whereas the bilayer PdSe2 and monolayer Pd2Se3 are the thermodynamic product. The epitaxial alignment of interlayer rotation and translation between the PdSe2 and underlying 2D substrate was also revealed by ADF-STEM. These results offer both nanoscale and atomic-level insights into direct growth of van der Waals heterostructures, as well as an innovative method for 2D synthesis by predetermined nucleation.
|
Aug 2020
|
|
E02-JEM ARM 300CF
|
Abstract: We show interlayer stacking shifts occur in transition metal dichalcogenides (TMD) bilayers due to the strain introduced during sample heating, and attributed to rippling of one layer relative to the other. The atomic structure of the interlayer stacking is studied using annular dark field scanning transmission electron microscopy with an in situ heating holder. Before heating, bilayers show uniform interlayer stacking of AA′ and AB. When heated, contrast change is seen and associated with interlayer stacking changes at the atomic scale due to ripples. When cooled down to room temperature, these contrast features disappear, confirming it is a reversible process that is not related to defects or vacancies. Because the bottom layer is attached to the in situ heating chip made from Si3N4 and the top layer is in contact with the underlying TMD layer with weak van der Waals interaction, the two layers experience different forces during thermal expansion.
|
Jun 2020
|
|
E01-JEM ARM 200CF
|
Diamond Proposal Number(s):
[16854]
Abstract: 2D crystals are typically uniform and periodic in‐plane with stacked sheet‐like structure in the out‐of‐plane direction. Breaking the in‐plane 2D symmetry by creating unique lattice structures offers anisotropic electronic and optical responses that have potential in nanoelectronics. However, creating nanoscale‐modulated anisotropic 2D lattices is challenging and is mostly done using top‐down lithographic methods with ≈10 nm resolution. A phase transformation mechanism for creating 2D striated lattice systems is revealed, where controlled thermal annealing induces Se loss in few‐layered PdSe2 and leads to 1D sub‐nm etched channels in Pd2Se3 bilayers. These striated 2D crystals cannot be described by a typical unit cells of 1–2 Å for crystals, but rather long range nanoscale periodicity in each three directions. The 1D channels give rise to localized conduction states, which have no bulk layered counterpart or monolayer form. These results show how the known family of 2D crystals can be extended beyond those that exist as bulk layered van der Waals crystals by exploiting phase transformations by elemental depletion in binary systems.
|
Sep 2019
|
|
