Detectors
|
N.
Goyal
,
F. J.
Iguaz
,
S.
Aplin
,
A.
Balerna
,
P.
Bell
,
J.
Casas
,
M.
Cascella
,
S.
Chatterji
,
C.
Cohen
,
E.
Collet
,
E N.
Gimenez
,
H.
Graafsma
,
H.
Hirsemann
,
K.
Klementiev
,
T.
Kolodziej
,
T.
Martin
,
Ralf H.
Menk
,
C.
Menneglier
,
C.
Meraihia
,
J. R.
Murias
,
M.
Porro
,
M.
Quispe
,
B.
Schmitt
,
S.
Scully
,
M.
Turcato
,
C.
Ward
,
E.
Welter
Open Access
Abstract: The first operational prototype of a high-purity germanium (HPGe) detector developed within the European LEAPS-INNOV project is presented in this work. This prototype features a monolithic, multi-element sensor optimized for high-resolution X-ray spectroscopy in the hard X-ray regime, intended for handing high count rates of 30 Mcps, across a broad energy range (5–100 keV). The present prototype demonstrates a throughput of about 150–200 kcps/pixel, corresponding to a total count rate of about 1.5–2 Mcps for the full 10 element detector. We discuss here a complete laboratory-based characterization of the detector’s performance, as well as an on-beam evaluation at the BM05 beamline of the ESRF synchrotron facility, using monochromatic X-rays in the 20–50 keV energy range. We provide a detailed performance assessment that also includes a phenomenological defect-depth estimation model.
|
Dec 2026
|
|
I03-Macromolecular Crystallography
|
Diamond Proposal Number(s):
[39189]
Open Access
Abstract: The enzymes Cannabichromenic Acid Synthase (CBCAS), Cannabidiolic Acid Synthase (CBDAS) and Tetrahydrocannabinolic Acid Synthase (THCAS) are together the major cannabinoid synthase enzymes responsible for the biosynthesis of their respective metabolites from a common precursor Cannabigerolic Acid (CBGA). As the catalysts responsible for generating biological molecules of significant pharmaceutical value, there has been considerable interest in the enzymes with respect to heterologous production, mechanism, and incorporation into synthetic biology pathways for the facile industrial production of these molecules. The enzymes share high degrees of homology, and therefore their distinct specificities are governed by very subtle differences in sequence and therefore structure, although, until now, only a structure for THCAS has been reported. In this report, we present structures of CBCAS, CBDAS and a structure of THCAS at a higher resolution than the known structure, each in complex with their flavin coenzyme FAD. The structures reveal active site differences that may be responsible for the complementary activities observed, in terms of both first-shell amino acid substitutions, but also in more remote residues that influence active site topology through referred effects, or that have effects on substrate access. The structures provide a useful and informative platform for the rational engineering of improved or altered chemoselectivity in these enzymes.
|
Dec 2026
|
|
I12-JEEP: Joint Engineering, Environmental and Processing
|
Diamond Proposal Number(s):
[31697]
Open Access
Abstract: Carbonate reservoirs commonly contain deformation structures whose reactivation depends on their orientation relative to the prevailing stress field. This study experimentally investigates how the presence and orientation of natural deformation features –primarily deformation bands– affect the mechanical behaviour and deformation processes of quartz-rich (∼10 %) carbonate rocks. Triaxial axisymmetric compression tests were conducted at 0–30 MPa confining pressures on cylindrical samples (10 mm diameter), including cores of pristine material or with deformation structures at varying angles to the maximum principal stress. Mechanical tests were performed both on-beam at Diamond Light Source and off-beam, with Digital Volume Correlation applied to characterise strain evolution and micromechanical processes up to failure. The pristine material exhibits a high friction coefficient (μ = 1.07), and under confining pressures of 10–25 MPa, failure consistently localises along planes oriented ∼22° to the maximum principal stress. Natural deformation bands exert a strong control on macroscopic strength: favourably oriented bands reactivate readily and significantly reduce peak strength, whereas unfavourably oriented bands inhibit reactivation and promote the formation of new Coulomb-oriented fractures. Strain field analyses reveal that both bands remain inactive at low deviatoric stresses. Earlier localisation takes place in favourably banded samples, while pristine and unfavourably banded samples localise only at later loading stages. During macroscopic failure, X-ray images show pristine and unfavourably banded samples to develop macroscopic fractures with higher apertures, whereas favourably banded samples display slip-dominated reactivation. Grain crushing and pore collapse are obvious in both natural deformation bands. These results demonstrate that natural pre-existing deformation structures and their orientation critically influence strain localisation and strength in the tested quartz-rich carbonate samples, with implications for reservoir stability, fault damage zones, and engineered subsurface systems.
|
Dec 2026
|
|
I07-Surface & interface diffraction
|
Ehsan
Rezaee
,
Dimitar
Kutsarov
,
Esther Y.-H.
Hung
,
Benjamin M.
Gallant
,
Weidong
Xu
,
Yukun
Guo
,
Apostolos
Panagiotopoulos
,
George
Koutsourakis
,
Fernando A.
Castro
,
Samuel D.
Stranks
,
Henry J.
Snaith
,
S. Ravi P.
Silva
Diamond Proposal Number(s):
[36427]
Abstract: Commercialisation of perovskite photovoltaics (PV) hinges on scalable, environmentally responsible manufacturing; a challenge compounded by the widespread use of toxic solvents in current ink formulations. Here, we introduce a significantly reduced toxicity (SRT) solvent system for methylammonium lead iodide (MAPbI3) perovskite inks, specifically engineered for room-temperature, gas blowing assisted bar coating. Our formulation, based on ethanol and 2-methyltetrahydrofuran (2MeTHF) with a minimal fraction of dimethyl sulfoxide (DMSO), enables rapid crystallisation under mild thermal conditions following deposition, ensuring compatibility with both rigid and flexible substrates. This approach delivers uniform, defect-free perovskite films across large areas, validated through multi-scale characterisation techniques. Leveraging this SRT ink, we fabricate monolithically interconnected mini-modules (active area: 11.5 cm²) using a laser-based P1–P4 scribing process, achieving power conversion efficiencies (PCEs) exceeding 18%, among the highest reported for green, scalable perovskite processing. Performance gains are further enhanced by integrating bar-coated self-assembled monolayers (SAMs) as hole transport layers (HTLs), demonstrating industrial viability without compromising efficiency. Beyond device metrics, this work establishes a new sustainability benchmark by eliminating hazardous solvents and aligning with green chemistry principles, including low toxicity, biodegradability, and reduced environmental persistence. Our findings represent a critical step toward high-throughput, eco-friendly fabrication of perovskite solar modules, bridging the gap between laboratory innovation and industrial deployment.
|
Dec 2026
|
|
|
|
Hideo
Fukuhara
,
Hisham M.
Dokainish
,
Shunsuke
Kita
,
Koshiro
Tabata
,
Akira
Takasu
,
Juha
Huiskonen
,
Yuki
Anraku
,
Tomo
Nomai
,
Taiyo
Someya
,
Toshiya
Senda
,
David I.
Stuart
,
Michihito
Sasaki
,
Yasuko
Orba
,
Yasuhiko
Suzuki
,
Hirofumi
Sawa
,
Katsumi
Maenaka
Open Access
Abstract: Understanding the structural properties of pathogenic viruses in their native, infectious state is critical for rational vaccine and drug development. However, conducting cryo-electron microscopy (cryo-EM) under biosafety level 3 (BSL-3) containment presents significant challenges. Here, we established and validated a high-end cryo-EM workflow within a BSL-3 facility, comprehensively integrating facility design, containment measures, sample handling, cryo-transfer systems, and decontamination protocols. To demonstrate the utility and reproducibility of this workflow, we applied cryo-electron tomography to investigate severe acute respiratory syndrome coronavirus 2 in its native, active state. Our observations confirm that unfixed viral particles display pleomorphic features comparable to those previously reported in fixed or inactivated preparations, validating that these structural characteristics represent native features rather than artifacts of chemical fixation. Furthermore, spatial redistribution of surface spikes was observed. The establishment of this robust BSL-3 cryo-EM workflow provides a practical blueprint for the structural characterization of emerging high-consequence pathogens, supporting pandemic preparedness, vaccine development, and antiviral discovery.
|
Dec 2026
|
|
B18-Core EXAFS
|
Diamond Proposal Number(s):
[34632]
Open Access
Abstract: Carbon dioxide (CO2) hydrogenation represents a central route for sustainable fuel production and carbon recycling, yet its efficiency is critically dependent on the structural and electronic properties of the catalyst. In practical heterogeneous systems prepared by conventional wet-chemical methods, a distribution of active sites, ranging from atomically dispersed species to subnanometric clusters and nanoparticles, typically coexist in the final catalyst. Here, we investigate how support defect engineering governs this distribution in Ru/TiO2 catalysts with varying metal loadings and oxidative pre-treatments. Comprehensive spectroscopic and imaging analyses, including XPS, HR-STEM, and XAS established a clear correlation between Ru structure and catalytic behavior. Critically low Ru loadings (0.2 wt%) induced a transition from metallic nanoparticles to highly dispersed and single atom species, while oxidative pretreatment generated RuO2 like domains. A fraction of isolated Ru atoms persisted, particularly on defect-rich TiO2, where oxygen vacancies act as anchoring sites, improving stability under redox conditions. Catalytic testing revealed that Ru dispersion and oxidation state jointly determine activity and selectivity: extended metallic Ru or oxidized Ru nanoparticles favor complete hydrogenation to CH4, whereas isolated Ru species promote CO formation via the reverse water–gas shift pathway. The coexistence of these Ru configurations is associated with enhanced low temperature activity, while defect engineered supports improve stability against deactivation. Defect engineering of TiO2 provides an effective strategy to stabilize atomically dispersed Ru and to balance nanoparticles and atomic species, offering a versatile strategy to tune CO2 hydrogenation performance and advance the design of Ru based catalysts for sustainable hydrogenation processes.
|
Nov 2026
|
|
I15-Extreme Conditions
|
Diamond Proposal Number(s):
[40347]
Open Access
Abstract: Accessing compositionally complex rare-earth fluorite oxides usually requires high thermal budgets to ensure cation homogenization and phase purity. Here, it is demonstrated that a freeze-dried precursor–based synthesis provides an energy-efficient pathway to stabilize multication fluorite solid solutions under unusually mild conditions. Freeze-dried amorphous precursors are converted into single-phase cubic fluorite (Fm3̅m) oxides at temperatures as low as 500 °C across a systematic compositional series ranging from binary (CePr)O2-δ to six-component (CePrLaNdYSm)O2-δ. Phase purity is maintained up to 800 °C, while secondary phases emerge at higher temperatures, indicating the limits of entropy-assisted stabilization. Structural trends indicate temperature-controlled crystallite growth and a pronounced La³ ⁺-induced lattice expansion, whereas increasing lattice disorder and defect signatures with compositional complexity are evidenced by Raman and optical analyses. Overall, freeze-dried precursor–based synthesis enables low-temperature access to rare-earth high-entropy fluorite oxides, offering a versatile platform for defect-tolerant and nanostructured functional materials.
|
Nov 2026
|
|
I20-Scanning-X-ray spectroscopy (XAS/XES)
|
Biao
He
,
Pouya
Hosseini
,
Sheila
Hernandez
,
Tatiana
Priamushko
,
Fan
Bai
,
Patrick
Diehl
,
Aleksander
Kostka
,
Martin
Muhler
,
Serhiy
Cherevko
,
Kristina
Tschulik
,
Tong
Li
Abstract: Achieving efficient hydrogen production via water electrolysis requires the development of low-cost, highly active, and stable oxygen evolution reaction (OER) electrocatalysts. However, the OER electrocatalyst surface is not static; instead, it reconstructs and transforms dynamically and continuously during the OER. Multiple elementary processes occur simultaneously, and the OER electrocatalyst surface changes substantially as the OER proceeds. Thus, understanding these elementary processes and how they affect electrocatalytic performance is essential for OER electrocatalyst design. In this study, we demonstrate that vanadium substitution markedly enhances the OER performance of cobalt spinel oxide. Co2VO4 nanoparticles achieve a low overpotential of approximately 306 mV at 10 mA cm–2 and maintain their activity for over 80 h of chronopotentiometry measurements, significantly outperforming the lower-substituted Co2.75V0.25O4 and Co3O4. Using a multimodal characterization approach, we reveal that the enhanced activity and electrochemical stability of Co2VO4 originate from the in situ formation of hydrated and defective γ-type (Co0.75V0.25)OOH clusters that are possibly continuously self-healed through highly reversible CoII(OH)2 ↔ γ-type oxyhydroxide transformation. This reversible transformation is triggered by pronounced vanadium dissolution due to severe lattice distortion induced by tetrahedrally coordinated vanadium (+5) sites in Co2VO4. In contrast, Co2.75V0.25O4 forms an epitaxial, less hydrated β-type (Co0.92V0.08)OOH layer that degrades via vanadium leaching, causing poor stability. Overall, our findings reveal that a pronounced vanadium (+5) content in Co-based spinel facilitates the highly reversible CoII(OH) 2 ↔ γ-type oxyhydroxide transformation, which is an effective strategy to promote OER activity and stability of cobalt-based spinel oxide catalysts toward OER.
|
Nov 2026
|
|
|
|
Abstract: This study investigates the structural and magnetic effects of reduced graphene oxide (rGO) incorporation in Mn2O3/ZnO nanocomposites using advanced characterization techniques including synchrotron X-ray powder diffraction (SXRPD), field emission scanning electron microscopy (FE-SEM), X-ray absorption spectroscopy (XAS), and X-ray magnetic circular dichroism (XMCD). rGO addition systematically alters crystallite size and lattice strain in both oxide phases, with Mn2O3 crystallites reaching maximum growth at 3rGO loading. Lattice strain analysis revealed that rGO affects the internal structure of the materials differently: it alters Mn2O3 and ZnO in unique ways. FE-SEM images showed that adding rGO improved particle dispersion and yielded smaller and more uniform particles. X-ray absorption spectroscopy demonstrates progressive Mn3+ to Mn2+ reduction with increasing rGO content, indicating electron transfer between graphene and the oxide matrix. Most significantly, magnetic measurements show exceptional tunability, with the 2rGO composition producing the strongest net Mn X-ray magnetic circular dichroism (XMCD) response in the series, while higher rGO loading changes the sign of this dichroic signal. These results demonstrate pronounced compositional control over the Mn magnetic response in metal oxide based rGO nanocomposites, motivating further investigation of this materials platform for applications, such as spintronics and magnetic sensing, where a tunable magnetic response is desirable.
|
Nov 2026
|
|
I13-2-Diamond Manchester Imaging
|
Dominic
Spencer-Jolly
,
Guanchen
Li
,
Bingkun
Hu
,
Shengming
Zhang
,
Jaimini J.
Mistry
,
Mikkel
Juelsholt
,
Sofia
De Sousa Coutinho
,
Lechen
Yang
,
James
Le Houx
,
Shashidhara
Marathe
,
Dominic L. R.
Melvin
,
Peter G.
Bruce
Diamond Proposal Number(s):
[31959, 43734]
Open Access
Abstract: Solid-state batteries pairing lithium metal anodes with inorganic solid electrolytes promise a step change in energy density, but during charging at practical rates lithium dendrites penetrate the solid electrolyte, short-circuiting the cell. Our current understanding of dendrite propagation derives largely from symmetric Li−Li cells with millimetre-thick electrolyte pellets, whereas practical cells will employ solid electrolyte separators less than 100 μm in thickness. In this work, we use in situ synchrotron X-ray computed tomography to show that dendrites in a thin Li6PS5Cl separator, which generally propagate from the lithium anode to the cathode, can be made to propagate laterally by the cathode. Volume contraction of the NMC cathode during charge places the thin separator under lateral compressive stress, deflecting dendritic cracks to propagate laterally (parallel to the electrodes) rather than transversely (across the separator). The result is that the cell resists short circuit even after passing 3 mA h cm−2 capacity at a rate of 3 mA cm−2. Replacing NMC with zero-volume-change pre-lithiated Li4Ti5O12 removes this compressive stress, and the cell rapidly fails by transverse cracking. Chemomechanical modelling rationalises both behaviours, with cathode volume change emerging as a design parameter that can suppress or accelerate failure, with direct implications for cathode selection and cathode/separator interface engineering in practical solid-state batteries.
|
Nov 2026
|
|