I09-Surface and Interface Structural Analysis
|
Aleksandr
Baklanov
,
Johannes T.
Kuchle
,
David A.
Duncan
,
Reinhard J.
Maurer
,
Martin
Schwarz
,
Eduardo Corral
Rascon
,
Ignacio
Piquero-Zulaica
,
Huynh Thien
Ngo
,
Alexander
Riss
,
Francesco
Allegretti
,
Willi
Auwärter
,
Paul T. P.
Ryan
Diamond Proposal Number(s):
[18874, 24276]
Abstract: We present a comprehensive, quantitative multimethod characterization of the geometric and electronic interfacial structure of zinc-porphine (Zn-P) on coinage metal supports, namely, Ag(111) and Cu(111). Complementary techniques including X-ray standing waves, X-ray photoelectron spectroscopy, scanning tunneling microscopy, bond-resolved atomic force microscopy, and density functional theory calculations reveal the molecular conformations, signal a temperature-dependence of element-specific adsorption heights, rule out a decisive role of the d10 nature of the Zn center for the adsorption configuration, and uncover a considerably increased Zn-P adsorption height on Ag(111) compared to Cu(111). Furthermore, a pronounced out-of-plane displacement of the Zn center upon water ligation is demonstrated, a manifestation of the surface trans-effect. This study thus sheds light on effects of temperature, chemical nature of the metal center, its ligation, and the coinage metal support on interfacial structure and molecular deformation of an archetypical surface-anchored metal-tetrapyrrole.
|
Apr 2023
|
|
I11-High Resolution Powder Diffraction
|
Diamond Proposal Number(s):
[17261, 20785]
Open Access
Abstract: The results are presented of a detailed combined experimental and theoretical investigation of the influence of coadsorbed electron-donating alkali atoms and the prototypical electron acceptor molecule 7,7,8,8-tetracyanoquinodimethane (TCNQ) on the Ag(100) surface. Several coadsorption phases were characterized by scanning tunneling microscopy, low-energy electron diffraction, and soft X-ray photoelectron spectroscopy. Quantitative structural data were obtained using normal-incidence X-ray standing wave (NIXSW) measurements and compared with the results of density functional theory (DFT) calculations using several different methods of dispersion correction. Generally, good agreement between theory and experiment was achieved for the quantitative structures, albeit with the prediction of the alkali atom heights being challenging for some methods. The adsorption structures depend sensitively on the interplay of molecule–metal charge transfer and long-range dispersion forces, which are controlled by the composition ratio between alkali atoms and TCNQ. The large difference in atomic size between K and Cs has negligible effects on stability, whereas increasing the ratio of K/TCNQ from 1:4 to 1:1 leads to a weakening of molecule–metal interaction strength in favor of stronger ionic bonds within the two-dimensional alkali–organic network. A strong dependence of the work function on the alkali donor–TCNQ acceptor coadsorption ratio is predicted.
|
Jan 2023
|
|
|
|
Open Access
Abstract: X-ray photoemission and X-ray absorption spectroscopy are important techniques to characterize chemical bonding at surfaces and are often used to identify the strength and nature of adsorbate–substrate interactions. In this study, we judge the ability of X-ray spectroscopic techniques to identify different regimes of chemical bonding at metal–organic interfaces. To achieve this, we sample different interaction strength regimes in a comprehensive and systematic way by comparing two topological isomers, azulene and naphthalene, adsorbed on three metal substrates with varying reactivity, namely the (111) facets of Ag, Cu, and Pt. Using density functional theory, we simulate core-level binding energies and X-ray absorption spectra of the molecular carbon species. The simulated spectra reveal three distinct characteristics based on the molecule-specific spectral features which we attribute to types of surface chemical bonding with varying strength. We find that weak physisorption only leads to minor changes compared to the gas-phase spectra, weak chemisorption leads to charge transfer and significant spectral changes, and strong chemisorption leads to a loss of the molecule-specific features in the spectra. The classification we provide is aimed at assisting interpretation of experimental X-ray spectra for complex metal–organic interfaces.
|
Jan 2023
|
|
I09-Surface and Interface Structural Analysis
|
Benedikt P.
Klein
,
Matthew A.
Stoodley
,
Matthew
Edmondson
,
Luke A.
Rochford
,
Marc
Walker
,
Lars
Sattler
,
Sebastian
Weber
,
Gerhard
Hilt
,
Leon B. S.
Williams
,
Tien-Lin
Lee
,
Alex
Saywell
,
Reinhard J.
Maurer
,
David A.
Duncan
Diamond Proposal Number(s):
[25379]
Open Access
Abstract: Ultra-high vacuum deposition of the polycyclic aromatic hydrocarbons azupyrene and pyrene onto a Cu(111) surface held at a temperature of 1000 K is herein shown to result in the formation of graphene. The presence of graphene was proven using scanning tunneling microscopy, x-ray photoelectron spectroscopy, angle-resolved photoemission spectroscopy, Raman spectroscopy, and low energy electron diffraction. The precursors, azupyrene and pyrene, are comparatively large aromatic molecules in contrast to more commonly employed precursors like methane or ethylene. While the formation of the hexagonal graphene lattice could naively be expected when pyrene is used as a precursor, the situation is more complex for azupyrene. In this case, the non-alternant topology of azupyrene with only 5- and 7-membered rings must be altered to form the observed hexagonal graphene lattice. Such a rearrangement, converting a non-alternant topology into an alternant one, is in line with previous reports describing similar topological alterations, including the isomerization of molecular azupyrene to pyrene. The thermal synthesis route to graphene, presented here, is achievable at comparatively low temperatures and under ultra-high vacuum conditions, which may enable further investigations of the growth process in a strictly controlled and clean environment that is not accessible with traditional precursors.
|
Nov 2022
|
|
|
|
Benedikt P.
Klein
,
Alexander
Ihle
,
Stefan R.
Kachel
,
Lukas
Ruppenthal
,
Samuel J.
Hall
,
Lars
Sattler
,
Sebastian M.
Weber
,
Jan
Herritsch
,
Andrea
Jaegermann
,
Daniel
Ebeling
,
Reinhard J.
Maurer
,
Gerhard
Hilt
,
Ralf
Tonner-Zech
,
André
Schirmeisen
,
J. Michael
Gottfried
Abstract: Defects play a critical role for the functionality and performance of materials, but the understanding of the related effects is often lacking, because the typically low concentrations of defects make them difficult to study. A prominent case is the topological defects in two-dimensional materials such as graphene. The performance of graphene-based (opto-)electronic devices depends critically on the properties of the graphene/metal interfaces at the contacting electrodes. The question of how these interface properties depend on the ubiquitous topological defects in graphene is of high practical relevance, but could not be answered so far. Here, we focus on the prototypical Stone–Wales (S–W) topological defect and combine theoretical analysis with experimental investigations of molecular model systems. We show that the embedded defects undergo enhanced bonding and electron transfer with a copper surface, compared to regular graphene. These findings are experimentally corroborated using molecular models, where azupyrene mimics the S–W defect, while its isomer pyrene represents the ideal graphene structure. Experimental interaction energies, electronic-structure analysis, and adsorption distance differences confirm the defect-controlled bonding quantitatively. Our study reveals the important role of defects for the electronic coupling at graphene/metal interfaces and suggests that topological defect engineering can be used for performance control.
|
Aug 2022
|
|
I07-Surface & interface diffraction
I09-Surface and Interface Structural Analysis
|
Philip J.
Mousley
,
Luke A.
Rochford
,
Paul T. P.
Ryan
,
Philip
Blowey
,
James
Lawrence
,
David A.
Duncan
,
Hadeel
Hussain
,
Billal
Sohail
,
Tien-Lin
Lee
,
Gavin R.
Bell
,
Giovanni
Costantini
,
Reinhard J.
Maurer
,
Christopher
Nicklin
,
D. Phil
Woodruff
Diamond Proposal Number(s):
[14884, 4884]
Open Access
Abstract: While the phenomenon of metal substrate adatom incorporation into molecular overlayers is generally believed to occur in several systems, the experimental evidence for this relies on the interpretation of scanning tunneling microscopy (STM) images, which can be ambiguous and provides no quantitative structural information. We show that surface X-ray diffraction (SXRD) uniquely provides unambiguous identification of these metal adatoms. We present the results of a detailed structural study of the Au(111)-F4TCNQ system, combining surface characterization by STM, low-energy electron diffraction, and soft X-ray photoelectron spectroscopy with quantitative experimental structural information from normal incidence X-ray standing wave (NIXSW) and SXRD, together with dispersion-corrected density functional theory (DFT) calculations. Excellent agreement is found between the NIXSW data and the DFT calculations regarding the height and conformation of the adsorbed molecule, which has a twisted geometry rather than the previously supposed inverted bowl shape. SXRD measurements provide unequivocal evidence for the presence and location of Au adatoms, while the DFT calculations show this reconstruction to be strongly energetically favored.
|
Apr 2022
|
|
I09-Surface and Interface Structural Analysis
|
Diamond Proposal Number(s):
[17261, 20785]
Abstract: A quantitative structural investigation is reported, aimed at resolving the issue of whether substrate adatoms are incorporated into the monolayers formed by strong molecular electron acceptors deposited onto metallic electrodes. A combination of normal-incidence X-ray standing waves, low-energy electron diffraction, scanning tunnelling microscopy, and X-ray photoelectron spectroscopy measurements demonstrate that the systems TCNQ and F4TCNQ on Ag(100) lie at the boundary between these two possibilities and thus represent ideal model systems with which to study this effect. A room-temperature commensurate phase of adsorbed TCNQ is found not to involve Ag adatoms, but to adopt an inverted bowl configuration, long predicted but not previously identified experimentally. By contrast, a similar phase of adsorbed F4TCNQ does lead to Ag adatom incorporation in the overlayer, the cyano end groups of the molecule being twisted relative to the planar quinoid ring. Density functional theory (DFT) calculations show that this behavior is consistent with the adsorption energetics. Annealing of the commensurate TCNQ overlayer phase leads to an incommensurate phase that does appear to incorporate Ag adatoms. Our results indicate that the inclusion (or exclusion) of metal atoms into the organic monolayers is the result of both thermodynamic and kinetic factors.
|
Mar 2022
|
|
|
|
Open Access
Abstract: Diamond-based materials have unique properties that are exploited in many electrochemical, optical, thermal, and quantum applications. When grown via chemical vapor deposition (CVD), the growth rate of the (110) face is typically much faster than the other two dominant crystallographic orientations, (111) and (100). As such, achieving sufficiently large-area and high-quality (110)-oriented crystals is challenging and typically requires post-growth processing of the surface. Whilst CVD growth confers hydrogen terminations on the diamond surface, the majority of post-growth processing procedures render the surface oxygen-terminated, which in turn impacts the surface properties of the material. Here, we determine the oxygenation state of the (110) surface using a combination of density functional theory calculations and X-ray photoelectron spectroscopy experiments. We show that in the 0–1000 K temperature range, the phase diagram of the (110) surface is dominated by a highly stable phase of coexisting and adjacent carbonyl and ether groups, while the stability of peroxide groups increases at low temperatures and high pressures. We propose a mechanism for the formation of the hybrid carbonyl-ether phase and rationalize its high stability. We further corroborate our findings by comparing simulated core-level binding energies with experimental X-ray photoelectron spectroscopy data on the highest-quality (110)-oriented diamond crystal surface reported to date.
|
Jan 2022
|
|
|
|
Open Access
Abstract: X-ray photoemission (XPS) and near edge x-ray absorption fine structure (NEXAFS) spectroscopy play an important role in investigating the structure and electronic structure of materials and surfaces. Ab initio simulations provide crucial support for the interpretation of complex spectra containing overlapping signatures. Approximate core-hole simulation methods based on density functional theory (DFT) such as the delta-self-consistent-field (ΔSCF) method or the transition potential (TP) method are widely used to predict K-shell XPS and NEXAFS signatures of organic molecules, inorganic materials and metal–organic interfaces at reliable accuracy and affordable computational cost. We present the numerical and technical details of our variants of the ΔSCF and TP method (coined ΔIP-TP) to simulate XPS and NEXAFS transitions. Using exemplary molecules in gas-phase, in bulk crystals, and at metal–organic interfaces, we systematically assess how practical simulation choices affect the stability and accuracy of simulations. These include the choice of exchange–correlation functional, basis set, the method of core-hole localization, and the use of periodic boundary conditions (PBC). We particularly focus on the choice of aperiodic or periodic description of systems and how spurious charge effects in periodic calculations affect the simulation outcomes. For the benefit of practitioners in the field, we discuss sensible default choices, limitations of the methods, and future prospects.
|
Feb 2021
|
|
I09-Surface and Interface Structural Analysis
|
Phil J.
Blowey
,
Billal
Sohail
,
Luke A.
Rochford
,
Timothy
Lafosse
,
David A.
Duncan
,
Paul
Ryan
,
Daniel Andrew
Warr
,
Tien-Lin
Lee
,
Giovanni
Costantini
,
Reinhard J.
Maurer
,
David Phillip
Woodruff
Diamond Proposal Number(s):
[15899, 18191]
Open Access
Abstract: Efficient charge transfer across metal–organic interfaces is a key physical process in modern organic electronics devices, and characterization of the energy level alignment at the interface is crucial to enable a rational device design. We show that the insertion of alkali atoms can significantly change the structure and electronic properties of a metal–organic interface. Coadsorption of tetracyanoquinodimethane (TCNQ) and potassium on a Ag(111) surface leads to the formation of a two-dimensional charge transfer salt, with properties quite different from those of the two-dimensional Ag adatom TCNQ metal–organic framework formed in the absence of K doping. We establish a highly accurate structural model by combination of quantitative X-ray standing wave measurements, scanning tunnelling microscopy, and density-functional theory (DFT) calculations. Full agreement between the experimental data and the computational prediction of the structure is only achieved by inclusion of a charge-transfer-scaled dispersion correction in the DFT, which correctly accounts for the effects of strong charge transfer on the atomic polarizability of potassium. The commensurate surface layer formed by TCNQ and K is dominated by strong charge transfer and ionic bonding and is accompanied by a structural and electronic decoupling from the underlying metal substrate. The consequence is a significant change in energy level alignment and work function compared to TCNQ on Ag(111). Possible implications of charge-transfer salt formation at metal–organic interfaces for organic thin-film devices are discussed.
|
May 2020
|
|
