I22-Small angle scattering & Diffraction
|
Diamond Proposal Number(s):
[17255]
Abstract: A series of poly(stearyl methacrylate)–poly(benzyl methacrylate) (PSMA–PBzMA) diblock copolymer nano-objects has been synthesized via reversible addition–fragmentation chain-transfer (RAFT) dispersion polymerization in n-dodecane at 20 wt%. This polymerization-induced self-assembly (PISA) formulation was modified by the incorporation of an anionic monomer, tetradodecylammonium 3-sulfopropyl methacrylate ([NDod4]+[SPMA]−) into the oil-insoluble PBzMA block. According to the literature (M. J. Derry, et al., Chem. Sci., 2016, 7, 5078–5090), PSMA18–PBzMA diblock copolymers only form spheres using this formulation for any core degree of polymerization. Unexpectedly, incorporating just a small fraction (<6 mol%) of [NDod4]+[SPMA]− comonomer into the structure-directing block resulted in the formation of non-spherical diblock copolymer nano-objects, including pure worm-like and vesicular morphologies. However, only spherical micelles could be formed using a longer PSMA34 stabilizer. These diblock copolymer nano-objects were characterized by transmission electron microscopy, small-angle X-ray scattering, and dynamic light scattering. The bulky nature of the ionic comonomer appears to make it possible to avoid the kinetically-trapped sphere morphology. This study reveals a new approach for tuning the morphology of diblock copolymer nano-objects in non-polar media.
|
Apr 2020
|
|
I22-Small angle scattering & Diffraction
|
Diamond Proposal Number(s):
[19852]
Abstract: Reversible addition–fragmentation chain transfer (RAFT) solution polymerization of 3-[tris(trimethylsiloxy)silyl] propyl methacrylate (SiMA) was conducted in toluene to prepare three PSiMA precursors with mean degrees of polymerization (DP) of 12, 13, or 15. Each precursor was then chain-extended in turn via RAFT dispersion polymerization of benzyl methacrylate (BzMA) in a low-viscosity silicone oil (decamethylcyclopentasiloxane, D5). 1H NMR studies confirmed that such polymerizations were relatively fast, with more than 99% BzMA conversion being achieved within 100 min at 90 °C. Moreover, gel permeation chromatography analysis indicated that these polymerizations were well controlled, with dispersities remaining below 1.25 when targeting PBzMA DPs up to 200. A phase diagram was constructed at a constant copolymer concentration of 20% w/w. Only spherical micelles were accessible when the PSiMA15 stabilizer was utilized, as determined by transmission electron microscopy and small-angle X-ray scattering (SAXS) studies. Nevertheless, these spheres exhibited narrow size distributions and tunable z-average diameters ranging between 19 and 49 nm, as determined by dynamic light scattering. In contrast, spheres, worms, or vesicles could be prepared depending on the target PBzMA DP when utilizing the relatively short PSiMA12 precursor. Moreover, each of these nano-objects could be obtained at copolymer concentrations as low as 5% w/w. To obtain more detailed structural information, these spheres, worms and vesicles were further characterized by SAXS. PSiMA12-PBzMA55 worms formed reasonably transparent free-standing gels when prepared at copolymer concentrations as low as 5% w/w and exhibited an elastic modulus (G′) of 90 Pa at 25 °C, as judged by oscillatory rheology studies. Finally, broadening of the molecular weight distribution was observed during the long-term storage of PSiMA-PBzMA dispersions at ambient temperature. We tentatively suggest that this instability is related to hydroxyl impurities in the SiMA, which leads to cross-linking side reactions. This problem also causes incipient flocculation of the spheres and worms during the long-term storage of such dispersions at 20 °C.
|
Feb 2020
|
|
I22-Small angle scattering & Diffraction
|
Diamond Proposal Number(s):
[21776]
Abstract: Polymerisation-induced self-assembly (PISA) is widely recognised to be a powerful platform technology for the rational synthesis of diblock copolymer nano-objects. RAFT alcoholic dispersion polymerisation is an important PISA formulation that has been used to prepare block copolymer spheres, worms and vesicles. In this study, we have utilised the RAFT dispersion polymerisation of lauryl methacrylate (LMA) using a poly(N-(2-methacryloyloxy)ethyl pyrrolidone) (PNMEP) stabiliser in order to prepare vesicles with highly deformable membranes. More specifically, a PNMEP28 precursor was chain-extended with LMA in an 80 : 20 w/w ethanol–water mixture to produce a series of PNMEP28-PLMAx diblock copolymer nano-objects (Mw/Mn ≤ 1.40; LMA conversions ≥98% in all cases, as indicated by 1H NMR spectroscopy). Differential scanning calorimetry studies confirmed that the membrane-forming PLMA block had a relatively low glass transition temperature. Transmission electron microscopy and small angle X-ray scattering were used to identify copolymer morphologies for these highly asymmetric diblock copolymers. A mixed sphere and vesicle morphology was observed when targeting x = 43, while polydisperse vesicles were obtained for x = 65–151. Slightly smaller vesicles with lower mean aggregation numbers and thicker membranes were obtained when targeting higher PLMA DPs. A minor population of sheet-like lamellae was observed for each target copolymer composition, with lamellar stacking leading to a structure peak in the scattering patterns recorded for PNMEP28-PLMA129 and PNMEP28-PLMA151. Bearing in mind potential industrial applications, RAFT chain-end removal strategies were briefly explored for such PNMEP28-PLMAx vesicles. Thus, 96% of dithiobenzoate chain-ends could be removed within 3 h at 50 °C via LED irradiation of a 7.5% aqueous dispersion of PNMEP28-PLMA87 vesicles at a wavelength of 405 nm. This appears to be an attractive method for RAFT chain-end removal from diblock copolymer nano-objects, particularly those comprising highly hydrophobic cores.
|
Jan 2020
|
|
I11-High Resolution Powder Diffraction
|
Yi-Yeoun
Kim
,
Robert
Darkins
,
Alexander
Broad
,
Alexander N.
Kulak
,
Mark A.
Holden
,
Ouassef
Nahi
,
Steven P.
Armes
,
Chiu C.
Tang
,
Rebecca F.
Thompson
,
Frederic
Marin
,
Dorothy M.
Duffy
,
Fiona C.
Meldrum
Open Access
Abstract: Acidic macromolecules are traditionally considered key to calcium carbonate biomineralisation and have long been first choice in the bio-inspired synthesis of crystalline materials. Here, we challenge this view and demonstrate that low-charge macromolecules can vastly outperform their acidic counterparts in the synthesis of nanocomposites. Using gold nanoparticles functionalised with low charge, hydroxyl-rich proteins and homopolymers as growth additives, we show that extremely high concentrations of nanoparticles can be incorporated within calcite single crystals, while maintaining the continuity of the lattice and the original rhombohedral morphologies of the crystals. The nanoparticles are perfectly dispersed within the host crystal and at high concentrations are so closely apposed that they exhibit plasmon coupling and induce an unexpected contraction of the crystal lattice. The versatility of this strategy is then demonstrated by extension to alternative host crystals. This simple and scalable occlusion approach opens the door to a novel class of single crystal nanocomposites.
|
Dec 2019
|
|
I22-Small angle scattering & Diffraction
|
Diamond Proposal Number(s):
[9490, 10237]
Abstract: Binary mixtures of anionic and non-ionic macromolecular chain transfer agents (macro-CTAs) are utilized in order to rationally design diblock copolymer nanoparticles with tunable morphologies and anionic character via pseudo-living radical polymerization. More specifically, poly(methacrylic acid) (PMAA) and poly(glycerol monomethacrylate) (PGMA) macro-CTAs are pre-mixed prior to reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate (HPMA). This strategy facilitates the formation of PHPMA-based diblock copolymer spheres, worm-like micelles and vesicles via polymerization-induced self-assembly (PISA). The presence of the anionic PMAA stabilizer block has a dramatic impact on the resulting copolymer morphology, particularly if the degree of polymerization (DP) of the PMAA stabilizer chains is longer than that of the PGMA. Two phase diagrams have been constructed to investigate the effect of the relative proportion and molar mass of the two macro-CTAs. Such a systematic approach is essential for the reproducible synthesis of pure worm-like micelles, which occupy relatively narrow phase space. The rheological behavior of a series of soft, free-standing worm gels is investigated. Finally, such gels are examined as model matrices for the growth of biomimetic calcite crystals and the role of the anionic PMAA stabilizer chains in directing crystal growth is evaluated.
|
Aug 2019
|
|
I22-Small angle scattering & Diffraction
|
Diamond Proposal Number(s):
[19852]
Open Access
Abstract: Polymerization-induced self-assembly (PISA) is a powerful platform technology for the rational and efficient synthesis of a wide range of block copolymer nano-objects (e.g. spheres, worms or vesicles) in various media. In situ small-angle X-ray scattering (SAXS) studies of RAFT dispersion polymerizations have previously provided detailed structural information during self-assembly (see M. J. Derry et al., Chem. Sci., 2016, 7, 5078-5090). However, conducting the analogous in situ SAXS studies during RAFT aqueous emulsion polymerizations poses a formidable technical challenge because the inherent-ly heterogeneous nature of such PISA formulations requires efficient stirring to generate sufficiently small monomer drop-lets. In the present study, the RAFT aqueous emulsion polymerization of 2-methoxyethyl methacrylate (MOEMA) has been explored for the first time. Chain extension of a relatively short non-ionic poly(glycerol monomethacrylate) (PGMA) precur-sor block leads to the formation of sterically-stabilized PGMA-PMOEMA spheres, worms or vesicles, depending on the pre-cise reaction conditions. Construction of a suitable phase diagram enables each of these three morphologies to be reproduc-ibly targeted at copolymer concentrations ranging from 10 to 30% w/w solids. High MOEMA conversions are achieved with-in 2 h at 70 °C, which makes this new PISA formulation well-suited for in situ small angle X-ray scattering (SAXS) studies using a stirrable SAXS reaction cell. This bespoke cell enables efficient stirring and hence allows in situ monitoring during RAFT emulsion polymerization for the first time. For example, the onset of micellar nucleation and subsequent evolution in particle size can be studied when preparing PGMA29-PMOEMA30 spheres at 10% w/w solids. When targeting PGMA29-PMOEMA70 vesicles under the same conditions, both the nucleation event and the subsequent evolution in the diblock co-polymer morphology from spheres to worms to vesicles are observed. These new insights significantly enhance our under-standing of the PISA mechanism during RAFT aqueous emulsion polymerization.
|
Jul 2019
|
|
I22-Small angle scattering & Diffraction
|
Open Access
Abstract: It is well-known that the Dengue fever virus undergoes a distinct morphological transition from topologically smooth particles to ‘bumpy’ particle on increasing the temperature from that of the mosquito carrier (28 °C) to that of the human host (37 °C). This virus also possesses pH-sensitive surface domains that undergo conformational changes during infection which facilitates exit from the endosomes. Herein we take a bio-inspired approach to design synthetic Dengue virus-mimicking nanoparticles to target triple-negative (TN) breast cancer cells that overexpress SR-B1 scavenger receptors. Thus, sterile pH-responsive methacrylic ABC triblock copolymer vesicles were prepared in aqueous solution via polymerization-induced self-assembly. Microphase separation between two enthalpically-incompatible hydrophobic membrane-forming blocks produced a well-defined framboidal morphology, with surface globules of ∼28 nm diameter protruding from the membrane. The hydrophilic stabilizer block comprises 97% hydroxyl-functionalized chains and 3% phosphorylcholine-functionalized chains, with the latter being critical for selective intracellular uptake. These framboidal vesicles remain intact at neutral pH but become swollen and cationic at pH 5–6 because the tertiary amine residues in the hydrophobic C block become protonated. We demonstrate that such nanoparticles enable selective targeting of TN breast cancer cells. This is because such malignant cells overexpress SR-B1 receptors for naturally-occurring phospholipids and hence take up the phosphorylcholine-decorated framboidal vesicles preferentially. In contrast, negligible cell uptake is observed over the same time period for both human dermal fibroblasts and normal breast cancer cells that minimally express the SR-B1 receptor. Moreover, we show that genetic material within such pH-responsive framboidal vesicles can be efficiently delivered to the cell nuclei while maintaining high cell viability.
|
May 2019
|
|
I22-Small angle scattering & Diffraction
|
Diamond Proposal Number(s):
[19852]
Abstract: A near-monodisperse monohydroxy-terminated polydimethylsiloxane (PDMS; mean degree of polymerization = 66) was esterified using a carboxylic acid-functionalized trithiocarbonate to yield a PDMS66 precursor with a mean degree of functionality of 92 ± 5% as determined by 1H NMR spectroscopy. This PDMS66 precursor was then chain-extended in turn using eight different methacrylic monomers in a low-viscosity silicone oil (decamethylcyclopentasiloxane, D5). Depending on the monomer type, such syntheses proceeded via either RAFT dispersion polymerization or RAFT emulsion polymerization. In each case the target DP of the core-forming block was fixed at 200, and the copolymer concentration was 25% w/w. Transmission electron microscopy studies indicated that kinetically trapped spheres were obtained in almost all cases. The only exception was 2-(dimethylamino)ethyl methacrylate (DMA), which enabled access to spheres, worms, or vesicles. This striking difference is attributed to the relatively low glass transition temperature for this latter block. A phase diagram was constructed for a series of PDMS66–PDMAx nano-objects by systematically increasing the PDMA target DP from 20 to 220 and varying the copolymer concentration between 10 and 30% w/w. Higher copolymer concentrations were required to access a pure worm phase, while only spheres, vesicles, or mixed phases were accessible at lower copolymer concentrations. Gel permeation chromatography studies indicated a linear evolution of number-average molecular weight (Mn) with PDMA DP while dispersities remained below 1.40, suggesting relatively well-controlled RAFT polymerizations. Small-angle X-ray scattering (SAXS) was used to characterize selected examples of spheres, worms, and vesicles. PDMS66–PDMA100–112 worms synthesized at 25–30% w/w formed free-standing gels at 20 °C. Oscillatory rheology studies performed on a 30% w/w PDMS66–PDMA105 worm dispersion indicated a storage modulus (gel strength) of 1057 Pa and a critical gelation concentration (CGC) of approximately 12% w/w. Finally, PDMS66–PDMAx worms could also be prepared in n-dodecane, hexamethyldisiloxane, or octamethylcyclotetrasiloxane. Rotational rheometry studies indicate that such worms are efficient viscosity modifiers for these nonpolar oils.
|
Mar 2019
|
|
I22-Small angle scattering & Diffraction
|
Open Access
Abstract: Reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate was used to prepare three poly(glycerol monomethacrylate)x–poly(2-hydroxypropyl methacrylate)y (denoted Gx-Hy or PGMA-PHPMA) diblock copolymers, namely G37-H80, G54-H140, and G71-H200. A master phase diagram was used to select each copolymer composition to ensure that a pure worm phase was obtained in each case, as confirmed by transmission electron microscopy (TEM) and small-angle x-ray scattering (SAXS) studies. The latter technique indicated a mean worm cross-sectional diameter (or worm width) ranging from 11 to 20 nm as the mean degree of polymerization (DP) of the hydrophobic PHPMA block was increased from 80 to 200. These copolymer worms form soft hydrogels at 20 °C that undergo degelation on cooling. This thermoresponsive behavior was examined using variable temperature DLS, oscillatory rheology, and SAXS. A 10% w/w G37-H80 worm dispersion dissociated to afford an aqueous solution of molecularly dissolved copolymer chains at 2 °C; on returning to ambient temperature, these chains aggregated to form first spheres and then worms, with the original gel strength being recovered. In contrast, the G54-H140 and G71-H200 worms each only formed spheres on cooling to 2 °C, with thermoreversible (de)gelation being observed in the former case. The sphere-to-worm transition for G54-H140 was monitored by variable temperature SAXS: these experiments indicated the gradual formation of longer worms at higher temperature, with a concomitant reduction in the number of spheres, suggesting worm growth via multiple 1D sphere–sphere fusion events. DLS studies indicated that a 0.1% w/w aqueous dispersion of G71-H200 worms underwent an irreversible worm-to-sphere transition on cooling to 2 °C. Furthermore, irreversible degelation over the time scale of the experiment was also observed during rheological studies of a 10% w/w G71-H200 worm dispersion. Shear-induced polarized light imaging (SIPLI) studies revealed qualitatively different thermoreversible behavior for these three copolymer worm dispersions, although worm alignment was observed at a shear rate of 10 s–1 in each case. Subsequently conducting this technique at a lower shear rate of 1 s–1 combined with ultra small-angle x-ray scattering (USAXS) also indicated that worm branching occurred at a certain critical temperature since an upturn in viscosity, distortion in the birefringence, and a characteristic feature in the USAXS pattern were observed. Finally, SIPLI studies indicated that the characteristic relaxation times required for loss of worm alignment after cessation of shear depended markedly on the copolymer molecular weight.
|
Oct 2018
|
|
I22-Small angle scattering & Diffraction
|
Diamond Proposal Number(s):
[14892]
Open Access
Abstract: This work focuses on the use of copolymer nanoparticles as a dispersant for a model pigment (silica). Reversible addition-fragmentation chain transfer (RAFT) alcoholic dispersion polymerization was used to synthesize sterically stabilized diblock copolymer nanoparticles. The steric stabilizer block was poly(2-dimethylamino)ethyl methacrylate) [PDMA] while the core-forming block was poly(benzyl methacrylate) [PBzMA]. The mean degrees of polymerization for the PDMA and PBzMA blocks were 71 and 100, respectively. TEM studies confirmed a near-monodisperse spherical morphology, while DLS studies indicated an intensity-average diameter of 30 nm. Small angle X-ray scattering (SAXS) reported a volume-average diameter of 29 ± 0.9 nm and a mean aggregation number of 154. Aqueous electrophoresis measurements confirmed that these PDMA71-PBzMA100 nanoparticles acquired cationic character when transferred from ethanol to water as a result of protonation of the weakly basic PDMA chains. Electrostatic adsorption of these nanoparticles from aqueous solution onto 470 nm silica particles led to either flocculation at submonolayer coverage or steric stabilization at or above monolayer coverage, as judged by DLS. This technique indicated that monolayer coverage was achieved on addition of approximately 465 copolymer nanoparticles per silica particle, which corresponds to a fractional surface coverage of around 0.42. These adsorption data were corroborated using thermogravimetry and UV spectroscopy. TEM studies indicated that the cationic nanoparticles remained intact at the silica surface after electrostatic adsorption, while aqueous electrophoresis confirmed that surface charge reversal occurred below pH 7. The relatively thick layer of adsorbed nanoparticles led to a significant reduction in the effective particle density of the silica particles from 1.99 g cm-3 to approximately 1.74 g cm-3, as judged by disk centrifuge photosedimentometry (DCP). Combining the DCP and SAXS data suggests that essentially no deformation of the PBzMA cores occurs during nanoparticle adsorption onto the silica particles.
|
Jan 2017
|
|
