I11-High Resolution Powder Diffraction
|
Diamond Proposal Number(s):
[17261, 20785]
Open Access
Abstract: The results are presented of a detailed combined experimental and theoretical investigation of the influence of coadsorbed electron-donating alkali atoms and the prototypical electron acceptor molecule 7,7,8,8-tetracyanoquinodimethane (TCNQ) on the Ag(100) surface. Several coadsorption phases were characterized by scanning tunneling microscopy, low-energy electron diffraction, and soft X-ray photoelectron spectroscopy. Quantitative structural data were obtained using normal-incidence X-ray standing wave (NIXSW) measurements and compared with the results of density functional theory (DFT) calculations using several different methods of dispersion correction. Generally, good agreement between theory and experiment was achieved for the quantitative structures, albeit with the prediction of the alkali atom heights being challenging for some methods. The adsorption structures depend sensitively on the interplay of molecule–metal charge transfer and long-range dispersion forces, which are controlled by the composition ratio between alkali atoms and TCNQ. The large difference in atomic size between K and Cs has negligible effects on stability, whereas increasing the ratio of K/TCNQ from 1:4 to 1:1 leads to a weakening of molecule–metal interaction strength in favor of stronger ionic bonds within the two-dimensional alkali–organic network. A strong dependence of the work function on the alkali donor–TCNQ acceptor coadsorption ratio is predicted.
|
Jan 2023
|
|
I10-Beamline for Advanced Dichroism
|
Peng
Chen
,
Qi
Yao
,
Junqi
Xu
,
Qiang
Sun
,
Alexander J.
Grutter
,
Patrick
Quarterman
,
Purnima P.
Balakrishnan
,
Christy J.
Kinane
,
Andrew J.
Caruana
,
Sean
Langridge
,
Ang
Li
,
Barat
Achinuq
,
Emily
Heppell
,
Yuchen
Ji
,
Shanshan
Liu
,
Baoshan
Cui
,
Jiuming
Liu
,
Puyang
Huang
,
Zhongkai
Liu
,
Guoqiang
Yu
,
Faxian
Xiu
,
Thorsten
Hesjedal
,
Jin
Zou
,
Xiaodong
Han
,
Haijun
Zhang
,
Yumeng
Yang
,
Xufeng
Kou
Diamond Proposal Number(s):
[30262]
Abstract: The intrinsic magnetic topological insulator MnBi2Te4 (MBT) provides a platform for the creation of exotic quantum phenomena. Novel properties can be created by modification of the MnBi2Te4 framework, but the design of stable magnetic structures remains challenging. Here we report ferromagnet-intercalated MnBi2Te4 superlattices with tunable magnetic exchange interactions. Using molecular beam epitaxy, we intercalate ferromagnetic MnTe layers into MnBi2Te4 to create [(MBT)(MnTe)m]N superlattices and examine their magnetic interaction properties using polarized neutron reflectometry and magnetoresistance measurements. Incorporation of the ferromagnetic spacer tunes the antiferromagnetic interlayer coupling of the MnBi2Te4 layers through the exchange-spring effect at MnBi2Te4/MnTe hetero-interfaces. The MnTe thickness can be used to modulate the relative strengths of the ferromagnetic and antiferromagnetic order, and the superlattice periodicity can tailor the spin configurations of the synthesized multilayers.
|
Dec 2022
|
|
I09-Surface and Interface Structural Analysis
|
Leanne A. H.
Jones
,
Zongda
Xing
,
Jack E. N.
Swallow
,
Huw
Shiel
,
Thomas J.
Featherstone
,
Matthew J.
Smiles
,
Nicole
Fleck
,
Pardeep K.
Thakur
,
Tien-Lin
Lee
,
Laurence J.
Hardwick
,
David O.
Scanlon
,
Anna
Regoutz
,
Tim D.
Veal
,
Vinod R.
Dhanak
Diamond Proposal Number(s):
[25980]
Open Access
Abstract: A comprehensive study of bulk molybdenum dichalcogenides is presented with the use of soft and hard X-ray photoelectron (SXPS and HAXPES) spectroscopy combined with hybrid density functional theory (DFT). The main core levels of MoS2, MoSe2, and MoTe2 are explored. Laboratory-based X-ray photoelectron spectroscopy (XPS) is used to determine the ionization potential (IP) values of the MoX2 series as 5.86, 5.40, and 5.00 eV for MoSe2, MoSe2, and MoTe2, respectively, enabling the band alignment of the series to be established. Finally, the valence band measurements are compared with the calculated density of states which shows the role of p-d hybridization in these materials. Down the group, an increase in the p-d hybridization from the sulfide to the telluride is observed, explained by the configuration energy of the chalcogen p orbitals becoming closer to that of the valence Mo 4d orbitals. This pushes the valence band maximum closer to the vacuum level, explaining the decreasing IP down the series. High-resolution SXPS and HAXPES core-level spectra address the shortcomings of the XPS analysis in the literature. Furthermore, the experimentally determined band alignment can be used to inform future device work.
|
Dec 2022
|
|
I07-Surface & interface diffraction
|
Margherita
Taddei
,
Joel A.
Smith
,
Benjamin M.
Gallant
,
Suer
Zhou
,
Robert J. E.
Westbrook
,
Yangwei
Shi
,
Jian
Wang
,
James N.
Drysdale
,
Declan P.
Mccarthy
,
Stephen
Barlow
,
Seth R.
Marder
,
Henry J.
Snaith
,
David S.
Ginger
Diamond Proposal Number(s):
[30612]
Abstract: We show that adding ethylenediamine (EDA) to perovskite precursor solutions improves the photovoltaic device performance and material stability of high-bromide-content, methylammonium-free, formamidinium cesium lead halide perovskites FA1–xCsxPb(I1–yBry)3, which are currently of interest for perovskite-on-Si tandem solar cells. Using spectroscopy and hyperspectral microscopy, we show that the additive improves film homogeneity and suppresses the phase instability that is ubiquitous in high-Br perovskite formulations, producing films that remain stable for over 100 days in ambient conditions. With the addition of 1 mol % EDA, we demonstrate 1.69 eV-gap perovskite single-junction p-i-n devices with a VOC of 1.22 V and a champion maximum-power-point-tracked power conversion efficiency of 18.8%, comparable to the best reported methylammonium-free perovskites. Using nuclear magnetic resonance (NMR) spectroscopy and X-ray diffraction techniques, we show that EDA reacts with FA+ in solution, rapidly and quantitatively forming imidazolinium cations. It is the presence of imidazolinium during crystallization which drives the improved perovskite thin-film properties.
|
Nov 2022
|
|
I09-Surface and Interface Structural Analysis
|
Benedikt P.
Klein
,
Matthew A.
Stoodley
,
Matthew
Edmondson
,
Luke A.
Rochford
,
Marc
Walker
,
Lars
Sattler
,
Sebastian
Weber
,
Gerhard
Hilt
,
Leon B. S.
Williams
,
Tien-Lin
Lee
,
Alex
Saywell
,
Reinhard J.
Maurer
,
David A.
Duncan
Diamond Proposal Number(s):
[25379]
Open Access
Abstract: Ultra-high vacuum deposition of the polycyclic aromatic hydrocarbons azupyrene and pyrene onto a Cu(111) surface held at a temperature of 1000 K is herein shown to result in the formation of graphene. The presence of graphene was proven using scanning tunneling microscopy, x-ray photoelectron spectroscopy, angle-resolved photoemission spectroscopy, Raman spectroscopy, and low energy electron diffraction. The precursors, azupyrene and pyrene, are comparatively large aromatic molecules in contrast to more commonly employed precursors like methane or ethylene. While the formation of the hexagonal graphene lattice could naively be expected when pyrene is used as a precursor, the situation is more complex for azupyrene. In this case, the non-alternant topology of azupyrene with only 5- and 7-membered rings must be altered to form the observed hexagonal graphene lattice. Such a rearrangement, converting a non-alternant topology into an alternant one, is in line with previous reports describing similar topological alterations, including the isomerization of molecular azupyrene to pyrene. The thermal synthesis route to graphene, presented here, is achievable at comparatively low temperatures and under ultra-high vacuum conditions, which may enable further investigations of the growth process in a strictly controlled and clean environment that is not accessible with traditional precursors.
|
Nov 2022
|
|
I09-Surface and Interface Structural Analysis
|
Diamond Proposal Number(s):
[23159, 26551]
Open Access
Abstract: The pursuit of new and better battery materials has given rise to numerous studies of the possibilities to use two-dimensional negative electrode materials, such as MXenes, in lithium-ion batteries. Nevertheless, both the origin of the capacity and the reasons for significant variations in the capacity seen for different MXene electrodes still remain unclear, even for the most studied MXene: Ti3C2Tx. Herein, freestanding Ti3C2Tx MXene films, composed only of Ti3C2Tx MXene flakes, are studied as additive-free negative lithium-ion battery electrodes, employing lithium metal half-cells and a combination of chronopotentiometry, cyclic voltammetry, X-ray photoelectron spectroscopy, hard X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy experiments. The aim of this study is to identify the redox reactions responsible for the observed reversible and irreversible capacities of Ti3C2Tx-based lithium-ion batteries as well as the reasons for the significant capacity variation seen in the literature. The results demonstrate that the reversible capacity mainly stems from redox reactions involving the Tx–Ti–C titanium species situated on the surfaces of the MXene flakes, whereas the Ti–C titanium present in the core of the flakes remains electro-inactive. While a relatively low reversible capacity is obtained for electrodes composed of pristine Ti3C2Tx MXene flakes, significantly higher capacities are seen after having exposed the flakes to water and air prior to the manufacturing of the electrodes. This is ascribed to a change in the titanium oxidation state at the surfaces of the MXene flakes, resulting in increased concentrations of Ti(II), Ti(III), and Ti(IV) in the Tx–Ti–C surface species. The significant irreversible capacity seen in the first cycles is mainly attributed to the presence of residual water in the Ti3C2Tx electrodes. As the capacities of Ti3C2Tx MXene negative electrodes depend on the concentration of Ti(II), Ti(III), and Ti(IV) in the Tx–Ti–C surface species and the water content, different capacities can be expected when using different manufacturing, pretreatment, and drying procedures.
|
Nov 2022
|
|
I08-Scanning X-ray Microscopy beamline (SXM)
|
Diamond Proposal Number(s):
[26226]
Open Access
Abstract: Batteries with inorganic solid-state electrolytes (ISSE) are attracting notable interest for next-generation systems implementing Lithium (Li) metal anodes, in view of achieving higher energy densities combined with superior safety. Notwithstanding extensive research and development work, this technology is not yet ready for industrial implementation, one of the key challenges being the stability of ISSEs, chiefly at the anodic interface. This work attacks this issue for the specific case of the LAGP/Li (Lithium Aluminium Germanium Phosphate/Lithium) interface with a micro-spectroscopic approach centred on post mortem Scanning Transmission X-ray Microscopy (STXM) of intact LMO/LAGP/Li thin-film batteries, microfabricated in discharged state. Pristine and cycled cells were mapped to pinpoint morphochemical changes, induced by electrochemical ageing. The evidenced shape changes, corresponding to mechanical damaging of the solid/solid electrodic interfaces correlate with LAGP decomposition at the anode, leading to reduction of Ge, whereas the chemical state at the cathodic interface is preserved. Thanks to its submicron spacial resolution, the STXM at the Ge L-edge and O K-edge spectra allowed to assess the highly localized nature of the chemical transformation of LAGP and its correlation with the formation of Li outgrowth features.
|
Nov 2022
|
|
I09-Surface and Interface Structural Analysis
|
Diamond Proposal Number(s):
[25807]
Open Access
Abstract: Understanding the chemical composition and morphological evolution of the solid electrolyte interphase (SEI) formed at the interface between the lithium metal electrode and an inorganic solid-state electrolyte is crucial for developing reliable all-solid-state lithium batteries. To better understand the interaction between these cell components, we carry out X-ray photoemission spectroscopy (XPS) measurements during lithium plating on the surface of a Li6PS5Cl solid-state electrolyte pellet using an electron beam. The analyses of the XPS data highlight the role of Li plating current density on the evolution of a uniform and ionically conductive (i.e., Li3P-rich) SEI capable of decreasing the electrode∣solid electrolyte interfacial resistance. The XPS findings are validated via electrochemical impedance spectrsocopy measurements of all-solid-state lithium-based cells.
|
Nov 2022
|
|
I07-Surface & interface diffraction
|
Philip N.
Jemmett
,
David C.
Milan
,
Richard J.
Nichols
,
Thomas
Howitt
,
Alexandra L.
Martin
,
Thomas
Arnold
,
Jonathan L.
Rawle
,
Christopher L.
Nicklin
,
Timothy R.
Dafforn
,
Liam R.
Cox
,
Sarah L.
Horswell
Diamond Proposal Number(s):
[15539, 18202]
Abstract: Sphingolipids are an important class of lipids found in mammalian cell membranes with important structural and signaling roles. They differ from another major group of lipids, the glycerophospholipids, in the connection of their hydrocarbon chains to their headgroups. In this study, a combination of electrochemical and structural methods has been used to elucidate the effect of this difference on sphingolipid behavior in an applied electric field. N-Palmitoyl sphingomyelin forms bilayers of similar coverage and thickness to its close analogue di-palmitoyl phosphatidylcholine. Grazing incidence diffraction data show slightly closer packing and a smaller chain tilt angle from the surface normal. Electrochemical IR results at low charge density show that the difference in tilt angle is retained on deposition to form bilayers. The bilayers respond differently to increasing electric field strength: chain tilt angles increase for both molecules, but sphingomyelin chains remain tilted as field strength is further increased. This behavior is correlated with disruption of the hydrogen-bonding network of small groups of sphingomyelin molecules, which may have significance for the behavior of molecules in lipid rafts in the presence of strong fields induced by ion gradients or asymmetric distribution of charged lipids.
|
Nov 2022
|
|
I09-Surface and Interface Structural Analysis
|
Diamond Proposal Number(s):
[24219, 31069]
Abstract: Ga
2
O
3
is emerging as a promising wide band-gap semiconductor for high-power electronics and deep ultraviolet optoelectronics. It is highly desirable to dope it with controllable carrier concentrations for different device applications. This work reports a combined photoemission spectroscopy and theoretical calculation study on the electronic structure of Si doped
Ga
2
O
3
films with carrier concentration varying from
4.6
×
10
18
c
m
−
3
to
2.6
×
10
20
c
m
−
3
. Hard x-ray photoelectron spectroscopy was used to directly measure the widening of the band gap as a result of occupation of conduction band and band-gap renormalization associated with many-body interactions. A large band-gap renormalization of 0.3 eV was directly observed in heavily doped
Ga
2
O
3
. Supplemented with hybrid density functional theory calculations, we demonstrated that the band-gap renormalization results from the decrease in energy of the conduction band edge driven by the mutual electrostatic interaction between added electrons. Moreover, our work reveals that Si is a superior dopant over Ge and Sn, because
Si
3
s
forms a resonant donor state above the conduction band minimum, leaving the host conduction band mostly unperturbed and a high mobility is maintained though the doping level is high. Insights of the present work have significant implications in doping optimization of
Ga
2
O
3
and realization of optoelectronic devices.
|
Nov 2022
|
|
