Open Access

Show Abstract ▼

Abstract: Acidic macromolecules are traditionally considered key to calcium carbonate biomineralisation and have long been first choice in the bio-inspired synthesis of crystalline materials. Here, we challenge this view and demonstrate that low-charge macromolecules can vastly outperform their acidic counterparts in the synthesis of nanocomposites. Using gold nanoparticles functionalised with low charge, hydroxyl-rich proteins and homopolymers as growth additives, we show that extremely high concentrations of nanoparticles can be incorporated within calcite single crystals, while maintaining the continuity of the lattice and the original rhombohedral morphologies of the crystals. The nanoparticles are perfectly dispersed within the host crystal and at high concentrations are so closely apposed that they exhibit plasmon coupling and induce an unexpected contraction of the crystal lattice. The versatility of this strategy is then demonstrated by extension to alternative host crystals. This simple and scalable occlusion approach opens the door to a novel class of single crystal nanocomposites.

Open Access

Show Abstract ▼

Abstract: Block copolymer self-assembly is normally conducted via post-polymerization processing at high dilution. In the case of block copolymer vesicles (or “polymersomes”), this approach normally leads to relatively broad size distributions, which is problematic for many potential applications. Herein we report the rational synthesis of low-polydispersity diblock copolymer vesicles in concentrated solution via polymerization-induced self-assembly using reversible addition–fragmentation chain transfer (RAFT) polymerization of benzyl methacrylate. Our strategy utilizes a binary mixture of a relatively long and a relatively short poly(methacrylic acid) stabilizer block, which become preferentially expressed at the outer and inner poly(benzyl methacrylate) membrane surface, respectively. Dynamic light scattering was utilized to construct phase diagrams to identify suitable conditions for the synthesis of relatively small, low-polydispersity vesicles. Small-angle X-ray scattering (SAXS) was used to verify that this binary mixture approach produced vesicles with significantly narrower size distributions compared to conventional vesicles prepared using a single (short) stabilizer block. Calculations performed using self-consistent mean field theory (SCMFT) account for the preferred self-assembled structures of the block copolymer binary mixtures and are in reasonable agreement with experiment. Finally, both SAXS and SCMFT indicate a significant degree of solvent plasticization for the membrane-forming poly(benzyl methacrylate) chains.

Open Access

Show Abstract ▼

Abstract: The solution behavior of a polystyrene–hydrogenated polyisoprene star diblock copolymer (Mn ∼ 384 K; 6 mol % polystyrene) is examined in nonpolar media. Variable temperature 1H NMR studies using deuterated n-dodecane confirm that the outer polystyrene blocks are only partially solvated in n-dodecane at 25 °C: the apparent polystyrene content of 3.2 ± 0.2 mol % remains essentially constant on heating up to 100 °C. Physical adsorption of this star diblock copolymer onto carbon black particles is examined, with particular attention being paid to the effect of copolymer concentration on colloidal stability. An isotherm is constructed for copolymer adsorption onto carbon black from n-dodecane at 20 °C using a supernatant depletion assay based on UV spectroscopy analysis of the aromatic chromophore in the polystyrene block. Langmuir-type adsorption is observed with a maximum adsorbed amount, Γ, of ∼2.2 ± 0.1 mg m–2. In addition, thermogravimetric analysis is used to directly determine the amount of adsorbed copolymer on the carbon black particles, which are essentially incombustible under an inert atmosphere. Analytical centrifugation, optical microscopy, and transmission electron microscopy studies indicate that the star diblock copolymer acts as an effective flocculant at low concentration, with steric stabilization only being observed above a certain critical copolymer concentration (∼5.5% w/w based on carbon black). This is attributed to the spatial location of the polystyrene block and the star copolymer architecture, which enables copolymer adsorption onto multiple carbon black particles at low coverage, leading to bridging flocculation. Above 5.5% w/w copolymer, the surface coverage is sufficiently high that all of the polystyrene “stickers” adsorb onto single carbon black particles, resulting in colloidally stable, sterically stabilized carbon black dispersions. Small-angle X-ray scattering (SAXS) is also used to characterize the copolymer-coated carbon black particles: this technique provides useful complementary insights regarding the rather subtle changes in the fractal morphology that occur with increasing copolymer concentration. Moreover, SAXS also provides direct evidence for the presence of the copolymer chains at the particle surface.

Open Access

Show Abstract ▼

Abstract: Soot formation in diesel engines is known to cause premature engine wear. Unfortunately, genuine diesel soot is expensive to generate, so carbon blacks are often used as diesel soot mimics. Herein, the suitability of a commercial carbon black (Regal 250R) as a surrogate for diesel soot dispersed in engine base oil is examined in the presence of two commonly used polymeric lubricant additives. The particle size, morphology, and surface composition of both substrates are assessed using BET surface area analysis, TEM, and XPS. The extent of adsorption of a poly(ethylene-co-propylene) (dOCP) statistical copolymer or a polystyrene-block-poly(ethylene-co-propylene) (PS−PEP) diblock copolymer onto carbon black or diesel soot from n-dodecane s compared indirectly using a supernatant depletion assay technique via UV spectroscopy. Thermogravimetric analysis is also used to directly determine the extent of copolymer adsorption. Degrees of dispersion are examined using optical microscopy, TEM, and analytical centrifugati n. SAXS studies reveal some structural differences between carbon black and diesel soot particles. The mean radius of gyration determined for the latter is significantly smaller than that calculated for the former, and in the absence of any copolymer, diesel soot suspended in n-dodecane forms relatively loose mass fractals compared to carbon black. SAXS provides evidence for copolymer adsorption and indicates that addition of either copolymer transforms the initially compact agglomerates into relatively loose aggregates. Addition of dOCP or PS−PEP does not significantly affect the structure of the carbon black primary particles, with similar results being observed for diesel soot. In favorable cases, remarkably similar data can be obtained for carbon black and diesel soot when using dOCP and PS−PEP as copolymer dispersants. However, it is not difficult to identify simple copolymer−particle−solvent combinations for which substantial differences can be observed. Such observations are most likely the result of issimilar surface chemistries, which can profoundly affect the colloidal stability.

Show Abstract ▼

Abstract: Hypothesis: Poly(methyl methacrylate) (PMMA) latexes in nonpolar solvents are an excellent model system to understand phenomena in low dielectric media, and understanding their internal structure is critical to characterizing their performance in both fundamental studies of colloidal interactions and in potential industrial applications. Both the PMMA cores and the poly(12-hydroxystearic acid) (PHSA) shells of the latexes are known to be penetrable by solvent and small molecules, but the relevance of this for the properties of these particles is unknown. Experiments: These particles can be prepared in a broad range of sizes, and two PMMA latexes dispersed in n-dodecane (76 and 685 nm in diameter) were studied using techniques appropriate to their size. Small-angle scattering (using both neutrons and X-rays) was used to study the small latexes, and analytical centrifugation was used to study the large latexes. These studies enabled the calculation of the core densities and the amount of solvent in the stabilizer shells for both latexes. Both have consequences on interpreting measurements using these latexes. Findings:The PHSA shells are highly solvated (∼85% solvent by volume), as expected for effective steric stabilizers. However, the PHSA chains do contribute to the intensity of neutron scattering measurements on concentrated dispersions and cannot be ignored. The PMMA cores have a slightly lower density than PMMA homopolymer, which shows that only a small free volume is required to allow small molecules to penetrate into the cores. Interestingly, the observations are essentially the same, regardless of the size of the particle; these are general features of these polymer latexes. Despite the latexes being used as a model physical system, the internal chemical structure is complex and must be fully considered when characterizing them.