I08-Scanning X-ray Microscopy beamline (SXM)
|
Diamond Proposal Number(s):
[14027]
Open Access
Abstract: Zn–air batteries are very promising devices for energy storage at high energy density due to their intrinsic safety, environmental friendliness, and low cost, but still, there are key issues to be solved to get to the industrial scale. One of the unsolved problems is the poor cyclability of batteries based on aqueous solvents that urges to consider nonaqueous solvents. Among different possible options are deep eutectic solvents, which are cost‐effective and technologically relatively easy to implement. The present investigation reports for the first time an operando scanning soft X‐ray microscope analysis of the Zn behaviour in a choline–chloride/urea deep eutectic solvents electrolyte during the cathodic and anodic phase formation processes taking place in battery charge and discharge, providing a platform for in‐depth space–time dependent investigations of the chemistry of crystallites evolving during potential cycling. These operando measurements have been enabled by the construction of a novel wet cell, improving the design and filling protocol of earlier generation cells developed by authors.
High‐resolution soft X‐ray microscope images were acquired in two modes: (a) dynamic mode at a fixed beam energy, allowing to follow morphology evolution under electrochemical control and (b) static mode for selected morphologies representative of characteristic Zn growth and dissolution steps.
|
Mar 2019
|
|
I08-Scanning X-ray Microscopy beamline (SXM)
|
Diamond Proposal Number(s):
[16407]
Open Access
Abstract: Biogas-energy is marginally profitable against the “parasitic” energy demands of processing biomass. Biogas involves microbial fermentation of feedstock hydrolyzate generated enzymatically or thermochemically. The latter also produces 5-hydroxymethyl furfural (5-HMF) which can be catalytically upgraded to 2, 5-dimethyl furan (DMF), a “drop in fuel.” An integrated process is proposed with side-stream upgrading into DMF to mitigate the “parasitic” energy demand. 5-HMF was upgraded using bacterially-supported Pd/Ru catalysts. Purpose-growth of bacteria adds additional process costs; Pd/Ru catalysts biofabricated using the sulfate-reducing bacterium (SRB) Desulfovibrio desulfuricans were compared to those generated from a waste consortium of acidophilic sulfidogens (CAS). Methyl tetrahydrofuran (MTHF) was used as the extraction-reaction solvent to compare the use of bio-metallic Pd/Ru catalysts to upgrade 5-HMF to DMF from starch and cellulose hydrolyzates. MTHF extracted up to 65% of the 5-HMF, delivering solutions, respectively, containing 8.8 and 2.2 g 5-HMF/L MTHF. Commercial 5% (wt/wt) Ru-carbon catalyst upgraded 5-HMF from pure solution but it was ineffective against the hydrolyzates. Both types of bacterial catalyst (5wt%Pd/3-5wt% Ru) achieved this, bio-Pd/Ru on the CAS delivering the highest conversion yields. The yield of 5-HMF from starch-cellulose thermal treatment to 2,5 DMF was 224 and 127 g DMF/kg extracted 5-HMF, respectively, for CAS and D. desulfuricans catalysts, which would provide additional energy of 2.1 and 1.2 kWh/kg extracted 5-HMF. The CAS comprised a mixed population with three patterns of metallic nanoparticle (NP) deposition. Types I and II showed cell surface-localization of the Pd/Ru while type III localized NPs throughout the cell surface and cytoplasm. No metallic patterning in the NPs was shown via elemental mapping using energy dispersive X-ray microanalysis but co-localization with sulfur was observed. Analysis of the cell surfaces of the bulk populations by X-ray photoelectron spectroscopy confirmed the higher S content of the CAS bacteria as compared to D. desulfuricans and also the presence of Pd-S as well as Ru-S compounds and hence a mixed deposit of PdS, Pd(0), and Ru in the form of various +3, +4, and +6 oxidation states. The results are discussed in the context of recently-reported controlled palladium sulfide ensembles for an improved hydrogenation catalyst.
|
May 2019
|
|
I08-Scanning X-ray Microscopy beamline (SXM)
|
Alastair J. M.
Lough
,
Douglas P.
Connelly
,
William B.
Homoky
,
Jeffrey A.
Hawkes
,
Valerie
Chavagnac
,
Alain
Castillo
,
Majid
Kazemian
,
Ko-Ichi
Nakamura
,
Tohru
Araki
,
Burkhard
Kaulich
,
Rachel A.
Mills
Diamond Proposal Number(s):
[12738]
Open Access
Abstract: Iron (Fe) limits primary productivity and nitrogen fixation in large regions of the world’s oceans. Hydrothermal supply of Fe to the global deep ocean is extensive; however, most of the previous work has focused on examining high temperature, acidic, focused flow on ridge axes that create “black smoker” plumes. The contribution of other types of venting to the global ocean Fe cycle has received little attention. To thoroughly understand hydrothermal Fe sources to the ocean, different types of vent site must be compared. To examine the role of more diffuse, higher pH sources of venting, a hydrothermal plume above the Von Damm vent field (VDVF) was sampled for Total dissolvable Fe (unfiltered, TDFe), dissolved Fe (<0.2 μm, dFe) and soluble Fe (<0.02 μm, sFe). Plume particles sampled in situ were characterized using scanning electron microscopy and soft X-ray spectromicroscopy. The VDVF vents emit visibly clear fluids with particulate Fe (TDFe-dFe, >0.2 μm) concentrations up to 196 nmol kg–1 comparable to concentrations measured in black smoker plumes on the Mid-Atlantic Ridge. Colloidal Fe (cFe) and sFe increased as a fraction of TDFe with decreasing TDFe concentration. This increase in the percentage of sFe and cFe within the plume cannot be explained by settling of particulates or mixing with background seawater. The creation of new cFe and sFe within the plume from the breakdown of pFe is required to close the Fe budget. We suggest that the proportional increase in cFe and sFe reflects the entrainment, breakdown and recycling of Fe bearing organic particulates near the vents. Fe plume profiles from the VDVF differ significantly from previous studies of “black smoker” vents where formation of new pFe in the plume decreases the amount of cFe. Formation and removal of Fe-rich colloids and particles will control the amount and physico-chemical composition of dFe supplied to the deep ocean from hydrothermal systems. This study highlights the differences in the stabilization of hydrothermal Fe from an off-axis diffuse source compared to black smokers. Off-axis diffuse venting represent a potentially significant and previously overlooked Fe source to the ocean due to the difficulties in detecting and locating such sites.
|
Jul 2019
|
|
I08-Scanning X-ray Microscopy beamline (SXM)
|
Diamond Proposal Number(s):
[19228, 22730]
Open Access
Abstract: Hydrothermal carbonisation (HTC) has been demonstrated to be a sustainable thermochemical process, capable of producing functionalised carbon materials for a wide range of applications. In order to better apply such materials, the local chemistry and reaction pathways governing hydrothermal carbon growth must be understood. We report the use of scanning transmission X-ray microscopy (STXM) to observe chemical changes in functionality of carbon between the interface and bulk regions of HTC. Spatially-resolved, element-specific X-ray photo-absorption spectra show the presence of differing local carbon chemistry between bulk “core” and interface “shell” regions of a glucose-derived hydrothermal carbon spherule. STXM provides direct evidence to suggest that mechanistic pathways differ between the core and shell of the hydrothermal carbon. In the shell region, at the water-carbon interface, more aldehyde and/or carboxylic species are suspected to provide a reactive interface for bridging reactions to occur with local furan-based monomers. In contrast, condensation reactions appear to dominate in the core, removing aryl-linking units between polyfuranic domains. The application of STXM to HTC presents opportunities for a more comprehensive understanding of the spatial distribution of carbon species within hydrothermal carbon, especially at the solvent-carbon interface.
|
Jan 2020
|
|
B24-Cryo Soft X-ray Tomography
|
Diamond Proposal Number(s):
[18339, 19615]
Open Access
Abstract: The organoiridium complex Ir[(C,N)2(O,O)] (1) where C, N = 1-phenylisoquinoline and O,O = 2,2,6,6-tetramethyl-3,5-heptanedionate is a promising photosensitiser for Photo-Dynamic Therapy (PDT). 1 is not toxic to cells in the dark. However, irradiation of the compound with one-photon blue or two-photon red light generates high levels of singlet oxygen (1O2) (in Zhang et al. Angew Chem Int Ed Engl 56 (47):14898-14902 https://doi.org/10.1002/anie.201709082,2017), both within cell monolayers and in tumour models. Moreover, photo-excited 1 oxidises key proteins, causing metabolic alterations in cancer cells with potent antiproliferative activity. Here, the tomograms obtained by cryo-Soft X-ray Tomography (cryo-SXT) of human PC3 prostate cancer cells treated with 1, irradiated with blue light, and cryopreserved to maintain them in their native state, reveal that irradiation causes extensive and specific alterations to mitochondria, but not other cellular components. Such new insights into the effect of 1O2 generation during PDT using iridium photosensitisers on cells contribute to a detailed understanding of their cellular mode of action.
|
Mar 2020
|
|
I08-Scanning X-ray Microscopy beamline (SXM)
I14-Hard X-ray Nanoprobe
|
Diamond Proposal Number(s):
[15230, 15854, 20809, 24526, 24531]
Open Access
Abstract: A hallmark of Parkinson’s disease is the death of neuromelanin‐pigmented neurons, but the role of neuromelanin is unclear. Lack of a neuromelanin‐specific marker was highlighted over 30 years ago, yet in‐situ characterization of neuromelanin remains dependent on detectable pigmentation, rather than direct quantification of neuromelanin. We show that direct, label‐free nanoscale visualization of neuromelanin and associated metal ions in human brain tissue can be achieved using synchrotron Scanning Transmission X‐ray Microscopy (STXM), via a characteristic feature in the neuromelanin x‐ray absorption spectrum at 287.4 eV that is also present in iron‐free and iron‐laden synthetic neuromelanin. This is confirmed in consecutive brain sections by correlating STXM neuromelanin imaging with silver nitrate‐stained neuromelanin. Analysis suggests that the 1s ‐ σ* (C‐S) transition in benzothiazine groups accounts for this feature. This advance in visualizing neuromelanin illustrates the wider potential of STXM as a label‐free spectromicroscopy technique applicable to both organic and inorganic materials.
|
Mar 2020
|
|
I08-Scanning X-ray Microscopy beamline (SXM)
|
Open Access
Abstract: This study explores the delivery of phosphorus to the upper atmospheres of Earth, Mars, and Venus via the ablation of cosmic dust particles. Micron-size meteoritic particles were flash heated to temperatures as high as 2900 K in a Meteor Ablation Simulator (MASI), and the ablation of PO and Ca recorded simultaneously by laser induced fluorescence. Apatite grains were also ablated as a reference. The speciation of P in anhydrous chondritic porous Interplanetary Dust Particles was made by K-edge X-ray absorption near edge structure (XANES) spectroscopy, demonstrating that P mainly occurs in phosphate-like domains. A thermodynamic model of P in a silicate melt was then developed for inclusion in the Leeds Chemical Ablation Model (CABMOD). A Regular Solution model used to describe the distribution of P between molten stainless steel and a multicomponent slag is shown to provide the most accurate solution for a chondritic-composition, and reproduces satisfactorily the PO ablation profiles observed in the MASI. Meteoritic P is moderately volatile and ablates before refractory metals such as Ca; its ablation efficiency in the upper atmosphere is similar to Ni and Fe. The speciation of evaporated P depends significantly on the oxygen fugacity, and P should mainly be injected into planetary upper atmospheres as PO2, which will then likely undergo dissociation to PO (and possibly P) through hyperthermal collisions with air molecules. The global P ablation rates are estimated to be 0.017 t d−1 (tonnes per Earth day), 1.15 × 10−3 t d−1 and 0.024 t d−1 for Earth, Mars and Venus, respectively.
|
Apr 2020
|
|
I08-Scanning X-ray Microscopy beamline (SXM)
|
Diamond Proposal Number(s):
[15230]
Open Access
Abstract: Background: Neuromelanin-pigmented neurons, which are highly susceptible to neurodegeneration in the Parkinson’s disease substantia nigra, harbour elevated iron levels in the diseased state. Whilst it is widely believed that neuronal iron is stored in an inert, ferric form, perturbations to normal metal homeostasis could potentially generate more reactive forms of iron capable of stimulating toxicity and cell death. However, non-disruptive analysis of brain metals is inherently challenging, since use of stains or chemical fixatives, for example, can significantly influence metal ion distributions and/or concentrations in tissues. Aims: The aim of this study was to apply synchrotron soft x-ray spectromicroscopy to the characterisation of iron deposits and their local environment within neuromelanin-containing neurons of Parkinson’s disease substantia nigra. Methods: Soft x-ray spectromicroscopy was applied in the form of Scanning Transmission X-ray Microscopy (STXM) to analyse resin-embedded tissue, without requirement for chemically disruptive processing or staining. Measurements were performed at the oxygen and iron K-edges in order to characterise both organic and inorganic components of anatomical tissue using a single label-free method. Results: STXM revealed evidence for mixed oxidation states of neuronal iron deposits associated with neuromelanin clusters in Parkinson’s disease substantia nigra. The excellent sensitivity, specificity and spatial resolution of these STXM measurements showed that the iron oxidation state varies across sub-micron length scales. Conclusions: The label-free STXM approach is highly suited to characterising the distributions of both inorganic and organic components of anatomical tissue, and provides a proof-of-concept for investigating trace metal speciation within Parkinson’s disease neuromelanin-containing neurons.
|
May 2020
|
|
I08-Scanning X-ray Microscopy beamline (SXM)
|
Diamond Proposal Number(s):
[17801, 17203]
Abstract: The good biocompatibility and corrosion resistance of the bulk CoCrMo alloy has resulted in it being used in the manufacture of implants and load bearing medical devices. These devices, however, can release wear and corrosion products which differ from the composition of the bulk CoCrMo alloy. The physicochemical characteristics of the particles and the associated in vivo reactivity are dictated by the wear mechanisms and electrochemical conditions at the sites of material loss. Debris released from CoCrMo hip bearings, taper junctions, or cement–stem interfaces can, therefore, have different chemical and morphological characteristics, which provide them with different in vivo toxicities. Here, we propose to assess and compare the characteristics of the particles released in vivo from CoCrMo tapers and cement–stem interfaces which have received less attention compared to debris originating from the hip bearings. The study uses state‐of‐art characterization techniques to provide a detailed understanding of the size, morphology, composition, and chemistry of the particles liberated from the wear and corrosion flakes from revised hip replacements, with an enzymatic treatment. The phase analyses identified Cr2O3 nanoparticles released from tapers and cement–stem interfaces, whose composition did not vary with origin or particle morphology. The size distributions showed significantly smaller particles were released from the stems, compared to the particles originating from the corresponding tapers. The investigation demonstrates that the tribocorrosive processes occurring at the taper and stem interfaces both result in Cr2O3 nanoparticle formation.
|
Jun 2020
|
|
B24-Cryo Soft X-ray Tomography
|
Ilias
Kounatidis
,
Megan L.
Stanifer
,
Michael A.
Phillips
,
Perrine
Paul-Gilloteaux
,
Xavier
Heiligenstein
,
Hongchang
Wang
,
Chidinma
Okolo
,
Thomas M.
Fish
,
Matthew C.
Spink
,
David I.
Stuart
,
Ilan
Davis
,
Steeveh
Boulant
,
Jonathan M.
Grimes
,
Ian M.
Dobbie
,
Maria
Harkiolaki
Diamond Proposal Number(s):
[21046, 18314]
Open Access
Abstract: Imaging of biological matter across resolution scales entails the challenge of preserving the direct and unambiguous correlation of subject features from the macroscopic to the microscopic level. Here, we present a correlative imaging platform developed specifically for imaging cells in 3D under cryogenic conditions by using X-rays and visible light. Rapid cryo-preservation of biological specimens is the current gold standard in sample preparation for ultrastructural analysis in X-ray imaging. However, cryogenic fluorescence localization methods are, in their majority, diffraction-limited and fail to deliver matching resolution. We addressed this technological gap by developing an integrated, user-friendly platform for 3D correlative imaging of cells in vitreous ice by using super-resolution structured illumination microscopy in conjunction with soft X-ray tomography. The power of this approach is demonstrated by studying the process of reovirus release from intracellular vesicles during the early stages of infection and identifying intracellular virus-induced structures.
|
Jun 2020
|
|