Publication
Article Metrics
Citations
Online attention
Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling
DOI:
10.1016/j.matdes.2020.109365
Authors:
M.
Meindlhumer
(Montanuniversität Leoben)
,
L. R.
Brandt
(MBLEM - University of Oxford)
,
J.
Zalesak
(Erich Schmid Institute for Materials Science, Austrian Academy of Sciences)
,
M.
Rosenthal
(ESRF)
,
H.
Hruby
(voestalpine eifeler Vacotec GmbH)
,
J.
Kopecek
(Institute of Physics, Czech Academy of Science)
,
Enrico
Salvati
(MBLEM - University of Oxford; University of Udine)
,
C.
Mitterer
(Montanuniversität Leoben)
,
R.
Daniel
(Montanuniversität Leoben)
,
J.
Todt
(Erich Schmid Institute for Materials Science, Austrian Academy of Sciences; Montanuniversität Leoben)
,
J.
Keckes
(Montanuniversität Leoben)
,
A. M.
Korsunsky
(MBLEM - University of Oxford; Diamond Light Source)
Co-authored by industrial partner:
No
Type:
Journal Paper
Journal:
Materials & Design
State:
Published (Approved)
Published:
November 2020
Open Access
Abstract: In order to understand the fracture resistance of nanocrystalline thin films, it is necessary to assess nanoscopic multiaxial stress fields accompanying crack growth during irreversible deformation. Here, a clamped cantilever with dimensions of 200 × 23.7 × 40 μm3 was machined by focused ion beam milling from a thin film composed of four alternating CrN and Cr layers. The cantilever was loaded to 460 mN in two steps and multiaxial strain distributions were determined by in situ cross-sectional X-ray nanodiffraction. Characterization in as-deposited state revealed the depth variation of fibre texture and residual stress across the layers. The in situ experiment indicated a strong influence of the residual stresses on the cross-sectional stress fields evolution and crack arrest capability at the CrN-Cr interface. In detail, an effective negative stress intensity of −5.9 ± 0.4 MPa m½ arose as a consequence of the residual stress state. Crack growth in the notched Cr layer occurred at a critical stress intensity of 2.8 ± 0.5 MPa m½. The results were complemented by two-dimensional numerical simulation to gain further insight into the elastic-plastic deformation evolution. The quantitative experimental and modelling results elucidate the stepwise nature of fracture advancement across the alternating brittle and ductile layers and their interfaces.
Journal Keywords: Cross-sectional X-ray nanodiffraction; Micromechanics; CrN; Cr; Multi-layer; Eigenstrain modelling
Subject Areas:
Materials,
Engineering
Facility: ID13 at ESRF
Added On:
02/12/2020 09:14
Documents:
1-s2.0-S0264127520309011-main.pdf
Discipline Tags:
Surfaces
Physics
Materials Science
interfaces and thin films
Engineering & Technology
Technical Tags: