B18-Core EXAFS
|
Diamond Proposal Number(s):
[14239]
Open Access
Abstract: Bimetallic catalysts combining precious and earth-abundant metals in well designed nanoparticle architectures can enable cost efficient and stable heterogeneous catalysis. Here, we present an interaction-driven in-situ approach to engineer finely dispersed Ni decorated Pt nanoparticles (1-6 nm) on perovskite nanofibres via reduction at high temperatures (600-800 oC). Deposition of Pt (0.5 wt%) enhances the reducibility of the perovskite support and promotes the nucleation of Ni cations via metal-support interaction, thereafter the Ni species react with Pt forming alloy nanoparticles, with the combined processes yielding smaller nanoparticles that either of the contributing processes. Tuneable uniform Pt-Ni nanoparticles are produced on the perovskite surface, yielding reactivity and stability surpassing 1 wt.% Pt/γ-Al2O3 catalysts for CO oxidation. This approach heralds the possibility of in-situ fabrication of supported bimetallic nanoparticles with engineered compositional distributions and performance.
|
May 2024
|
|
B18-Core EXAFS
|
Diamond Proposal Number(s):
[14239]
Open Access
Abstract: Sodium layered oxides showing oxygen redox activity are promising positive electrodes for sodium‑ion batteries (SIBs). However, structural degradation typically results in limited reversibility of the oxygen redox activity. Herein, the effect of Zn‑doping on the electrochemical properties of P3-type sodium manganese oxide, synthesised under air and oxygen is investigated for the first time. Air‑Na 0.67 Mn 0.9 Zn 0.1 O 2 and Oxy‑Na 0.67 Mn 0.9 Zn 0.1 O 2 exhibit stable cycling performance between 1.8 and 3.8 V, each maintaining 96% of their initial capacity after 30 cycles, where Mn 3+ /Mn 4+ redox dominates. Increasing the voltage range to 1.8‑4.3 V activates oxygen redox. For the material synthesised under air, oxygen redox activity is based on Zn, with limited reversibility. The additional transition metal vacancies in the material synthesised under oxygen result in enhanced oxygen redox reversibility with small voltage hysteresis. These results may assist the development of high‑capacity and structurally stable oxygen redox‑based materials for SIBs.
|
Apr 2022
|
|
B18-Core EXAFS
|
Diamond Proposal Number(s):
[17198]
Open Access
Abstract: The magnitude of ionic conductivity is known to depend upon both mobility and number of available carriers. For proton conductors, hydration is a key factor in determining the charge–carrier concentration in ABO3 perovskite oxides. Despite the high reported proton mobility of calcium titanate (CaTiO3), this titanate perovskite has thus far been regarded as a poor proton conductor due to the low hydration capability. Here, the enhanced proton conductivity of the defective calcium titanate Ca0.92TiO2.84(OH)0.16 prepared by replacing lattice oxygens with hydroxyl groups via a solvothermal route is shown. Conductivity measurements in a humidified Ar atmosphere reveal that, remarkably, this material exhibits one order of magnitude higher bulk conductivity (10−4 Scm−1 at 200 °C) than hydrated stoichiometric CaTiO3 prepared by traditional solid-state synthesis due to the higher concentration of protonic defects and variation in the crystal structure. The replacement of Ca2+ by Ni2+ in the Ca1−xTi1O3−2x(OH)2x, which mostly exsolve metallic Ni nanoparticles along orthorhombic (100) planes upon reduction, is also demonstrated. These results suggest a new strategy by tailoring the defect chemistry via hydration or cation doping followed by exsolution for targeted energy applications.
|
Aug 2021
|
|
|
|
Nuria
Tapia-Ruiz
,
A. Robert
Armstrong
,
Hande
Alptekin
,
Marco A.
Amores
,
Heather
Au
,
Jerry
Barker
,
Rebecca
Boston
,
William R
Brant
,
Jake M.
Brittain
,
Yue
Chen
,
Manish
Chhowalla
,
Yong-Seok
Choi
,
Sara I. R.
Costa
,
Maria
Crespo Ribadeneyra
,
Serena A
Cussen
,
Edmund J.
Cussen
,
William I. F.
David
,
Aamod V
Desai
,
Stewart A. M.
Dickson
,
Emmanuel I.
Eweka
,
Juan D.
Forero-Saboya
,
Clare
Grey
,
John M.
Griffin
,
Peter
Gross
,
Xiao
Hua
,
John T. S.
Irvine
,
Patrik
Johansson
,
Martin O.
Jones
,
Martin
Karlsmo
,
Emma
Kendrick
,
Eunjeong
Kim
,
Oleg V
Kolosov
,
Zhuangnan
Li
,
Stijn F L
Mertens
,
Ronnie
Mogensen
,
Laure
Monconduit
,
Russell E
Morris
,
Andrew J.
Naylor
,
Shahin
Nikman
,
Christopher A
O’keefe
,
Darren M. C.
Ould
,
Robert G.
Palgrave
,
Philippe
Poizot
,
Alexandre
Ponrouch
,
Stéven
Renault
,
Emily M.
Reynolds
,
Ashish
Rudola
,
Ruth
Sayers
,
David O.
Scanlon
,
S.
Sen
,
Valerie R.
Seymour
,
Begoña
Silván
,
Moulay Tahar
Sougrati
,
Lorenzo
Stievano
,
Grant S.
Stone
,
Chris I.
Thomas
,
Maria-Magdalena
Titirici
,
Jincheng
Tong
,
Thomas J.
Wood
,
Dominic S
Wright
,
Reza
Younesi
Open Access
Abstract: Increasing concerns regarding the sustainability of lithium sources, due to their limited availability and consequent expected price increase, have raised awareness of the importance of developing alternative energy-storage candidates that can sustain the ever-growing energy demand. Furthermore, limitations on the availability of the transition metals used in the manufacturing of cathode materials, together with questionable mining practices, are driving development towards more sustainable elements. Given the uniformly high abundance and cost-effectiveness of sodium, as well as its very suitable redox potential (close to that of lithium), sodium-ion battery technology offers tremendous potential to be a counterpart to lithium-ion batteries (LIBs) in different application scenarios, such as stationary energy storage and low-cost vehicles. This potential is reflected by the major investments that are being made by industry in a wide variety of markets and in diverse material combinations. Despite the associated advantages of being a drop-in replacement for LIBs, there are remarkable differences in the physicochemical properties between sodium and lithium that give rise to different behaviours, for example, different coordination preferences in compounds, desolvation energies, or solubility of the solid–electrolyte interphase inorganic salt components. This demands a more detailed study of the underlying physical and chemical processes occurring in sodium-ion batteries and allows great scope for groundbreaking advances in the field, from lab-scale to scale-up. This roadmap provides an extensive review by experts in academia and industry of the current state of the art in 2021 and the different research directions and strategies currently underway to improve the performance of sodium-ion batteries. The aim is to provide an opinion with respect to the current challenges and opportunities, from the fundamental properties to the practical applications of this technology.
|
Jul 2021
|
|
B18-Core EXAFS
|
Diamond Proposal Number(s):
[14239]
Abstract: Platinum functions exceptionally well as a nanoparticulate catalyst in many important fields, such as in the removal of atmospheric pollutants, but it is scarce, expensive and not always sufficiently durable. Here, we report a perovskite system in which 0.5 wt% Pt is integrated into the support and its subsequent conversion through exsolution to achieve a resilient catalyst. Owing to the instability of most Pt oxides at high temperatures, a thermally stable platinum oxide precursor, barium platinate, was used to preserve the platinum as an oxide during the solid-state synthesis in an approach akin to the Trojan horse legend. By tailoring the procedure, it is possible to produce a uniform equilibrated structure with active emergent Pt nanoparticles strongly embedded in the perovskite surface that display better CO oxidation activity and stability than those of conventionally prepared Pt catalysts. This catalyst was further evaluated for a variety of reactions under realistic test environments—CO and NO oxidation, diesel oxidation catalysis and ammonia slip reactions were investigated.
|
May 2021
|
|
|
|
John
Irvine
,
Jennifer
Rupp
,
Gang
Liu
,
Xiaoxiang
Xu
,
Sossina M
Haile
,
Xin
Qian
,
Alem
Snyder
,
Robert
Freer
,
Dursun
Ekren
,
Stephen
Skinner
,
Ozden
Celikbilek
,
Shigang
Chen
,
Shanwen
Tao
,
Tae Ho
Shin
,
Ryan
O'Hayre
,
Jake
Huang
,
Chuancheng
Duan
,
Meagan
Papac
,
Shuangbin
Li
,
Andrea
Russell
,
Veronica
Celorrio
,
Brian
Hayden
,
Hugo
Nolan
,
Xiubing
Huang
,
Ge
Wang
,
Ian
Metcalfe
,
Dragos
Neagu
,
Susana Garcia
Martin
Open Access
Abstract: Inorganic perovskites exhibit many important physical properties such as ferroelectricity, magnetoresistance and superconductivity as well their importance as Energy Materials. Many of the most important energy materials are inorganic perovskites and find application in batteries, fuel cells, photocatalysts, catalysis, thermoelectrics and solar thermal. In all these applications, perovskite oxides, or their derivatives offer highly competitive performance, often state of the art and so tend to dominate research into energy material. In the following sections, we review these functionalities in turn seeking to facilitate the interchange of ideas between domains. The potential for improvement is explored and we highlight the importance of both detailed modelling and in situ and operando studies in taking these materials forward.
|
May 2021
|
|
I12-JEEP: Joint Engineering, Environmental and Processing
|
Diamond Proposal Number(s):
[20820]
Open Access
Abstract: Alternative and sustainable waste sources are receiving increasing attention as they can be used to produce biofuels with a low carbon footprint. Waste fish oil is one such example and can be considered an abundant and sustainable waste source to produce biodiesel. Ultimately this could lead to fishing communities having their own "off-grid" source of fuel for boats and vehicles. At the industrial level biodiesel is currently produced by homogeneous catalysis because of the high catalyst activity and selectivity. In contrast, heterogeneous catalysis offers several advantages such as improved reusability, reduced waste and lower processing costs. Here we investigate the phase evolution of two heterogeneous catalysts, CaO and a Ca3Al2O6:CaO ('C3A:CaO') composite, under in-situ conditions for biodiesel production from fish oil. A new reactor was designed to monitor the evolution of the crystalline catalyst during the reaction using synchrotron powder X-ray diffraction (PXRD). The amount of calcium diglyceroxide (CaDG) began to increase rapidly after approximately 30 minutes, for both catalysts. This rapid increase in CaDG could be linked to ex-situ NMR studies which showed that the conversion of fish oil to biodiesel rapidly increased after 30 minutes. The key to the difference in activity of the two catalysts appears to be that the Ca3Al2O6:CaO composite maintains a high rate of calcium diglyceroxide formation for longer than CaO, although the initial formation rates and reaction kinetics are similar. Overall this specialised in-situ set-up has been shown to be suitable to monitor the phase evolution of heterogeneous crystalline catalysts during the triglycerides transesterification reaction, offering the opportunity to correlate the crystalline phases to activity, deactivation and stability.
|
May 2021
|
|
B18-Core EXAFS
|
Diamond Proposal Number(s):
[14239]
Abstract: Additional capacity delivered by oxygen redox activity may in principle represent a means of enhancing the electrochemical performance of layered sodium transition metal oxides. However, irreversible structural changes occurring during cycling typically cause significant capacity fade with limited reversibility of oxygen redox processes. Here, P3-structure Na0.67Co0.2Mn0.8O2 was synthesised under two different reaction conditions. Both materials exhibit very stable cycling performance in the voltage range 1.8–3.8 V where the redox couples of transition metals entirely dominate the electrochemical reaction. For the compound prepared under more oxidising conditions, anion redox activity is triggered in the wider voltage window 1.8–4.4 V in a reversible manner with exceptionally small voltage hysteresis (20 mV). The presence of vacancies in the transition metal layers is shown to play a critical role not only in generating unpaired O 2p states but also in stabilising the crystal structure in the high voltage region.
|
Nov 2020
|
|
B18-Core EXAFS
|
Diamond Proposal Number(s):
[14239]
Open Access
Abstract: Materials that display strong capabilities for lithium insertion without significant change in unit cell size on cycling are of considerable importance for electrochemical applications. Here, we present V2O3(SO4)2 as a host for lithium-ion batteries. Electrochemically, 2.0 Li+ ions can be inserted, giving Li2V2O3(SO4)2 with an oxidation state of V4+, as determined by X-ray absorption spectroscopy. The capacity of V2O3(SO4)2 can be increased from 157 mA h g−1 to 313 mA h g−1 with the insertion of two additional Li+ ions which would drastically improve the energy density of this material, but this would be over a wider potential range. Chemical lithiation using n-butyllithium was performed and characterisation using a range of techniques showed that a composition of Li4V2O3(SO4)2 can be obtained with an oxidation state of V3+. Structural studies of the lithiated materials by X-ray diffraction showed that up to 4.0 Li+ ions can be inserted into V2O3(SO4)2 whilst maintaining its framework structure.
|
Sep 2020
|
|
B18-Core EXAFS
|
Diamond Proposal Number(s):
[14239]
Abstract: Lithium-rich layered oxides and sodium layered oxides represent attractive positive electrode materials exhibiting excess capacity delivered by additional oxygen redox activity. However, structural degradation in the bulk and detrimental reactions with the electrolyte on the surface often occur, leading to limited reversibility of oxygen redox processes. Here we present the properties of P3-type Na0.67Mg0.2Mn0.8O2 synthesized under both air and oxygen. Both materials exhibit stable cycling performance in the voltage range 1.8-3.8 V where the Mn3+/Mn4+ redox couple entirely dominates the electrochemical reaction. Oxygen redox activity is triggered for both compounds in the wider voltage window 1.8-4.3 V with typical large voltage hysteresis from non-bonding O 2p states generated by substituted Mg. Interestingly, for the compound prepared under oxygen, an additional reversible oxygen redox activity is shown with exceptionally small voltage hysteresis (20 mV). The presence of vacancies in the transition metal layers is shown to play a critical role not only in forming unpaired O 2p states independent of substituted elements but also in stabilising the P3 structure during charge with reduced structural transformation to the O’3 phase at the end of discharge. This study reveals the important role of vacancies in P3-type sodium layered oxides to increase energy density using both cationic and anionic redox processes.
|
Sep 2020
|
|
